discodave0307 Posted September 24, 2012 Report Share Posted September 24, 2012 Grrrrrrrrrr Hi, Guys, you are the experts and I am the novice....I really need your help changing the names of the banners. I've been using tlp and tilemol but I'm finding it long slow and tedious, mainly cos on tlp I cant arrange the tiles properly because they seem to overlap behind other tiles eg Anaheims last tile I can't find cos its behind another....probably boston. On tilemolester the problem is that even with tutorial 11 by evan...its so difficult to line up the banners. Is there an easier way to change the names at all. I have no problems with the banner colours so far...thank God. Anyways...Help would be much appreciated guys. Best, Dave Quote Link to comment Share on other sites More sharing options...
PlabaxV2 Posted September 24, 2012 Report Share Posted September 24, 2012 (edited) Copy and paste out what letters you want and then put them together. Once that is done paste it in to the banner Then you can import it in to tile molester and paste it over the banner you are replacing EDIT: Offset is 001D16CC, 11x60 tiles Import the internal palette offset 1927500 (Size 64, 9bpp BGR and Motorola) It is Palette 2 Edited September 25, 2012 by PlabaxV2 Quote Link to comment Share on other sites More sharing options...
discodave0307 Posted September 25, 2012 Author Report Share Posted September 25, 2012 Ok...that sounds promising....So where exactly should I copy and paste the letters to. Also how do I isolate the banner to paste the ordered letters on to? Sorry for being a dunce...I'm still learning how to do all this.....it's interesting though! Cheers Dave Quote Link to comment Share on other sites More sharing options...
PlabaxV2 Posted September 25, 2012 Report Share Posted September 25, 2012 Ok...that sounds promising....So where exactly should I copy and paste the letters to. Also how do I isolate the banner to paste the ordered letters on to? Sorry for being a dunce...I'm still learning how to do all this.....it's interesting though! Cheers Dave Copy and paste the letters together so they make the word you want. You isolate it by copying and pasting the banner in the top left of the photo. After you have done that, drag the word you made by copying and pasting the letters on to the banner template Quote Link to comment Share on other sites More sharing options...
discodave0307 Posted September 25, 2012 Author Report Share Posted September 25, 2012 Would photoshop be good to open your attachment and edit/copy and paste? What you think? Quote Link to comment Share on other sites More sharing options...
PlabaxV2 Posted September 25, 2012 Report Share Posted September 25, 2012 Would photoshop be good to open your attachment and edit/copy and paste? What you think? Paint is what I use Quote Link to comment Share on other sites More sharing options...
discodave0307 Posted September 26, 2012 Author Report Share Posted September 26, 2012 Paint is what I use OK, that's easier so. Only one more question..... but probably not actually. After im done in paint and i want to import into tile molester, where exactly do i replace the edited banner. I ask this because Ive found it impossible to line up perfectly the banners...or anything for that matter. Thanks for your help...sorry for annoying you with all these trivial questions. Dave Quote Link to comment Share on other sites More sharing options...
PlabaxV2 Posted September 26, 2012 Report Share Posted September 26, 2012 (edited) OK, that's easier so. Only one more question..... but probably not actually. After im done in paint and i want to import into tile molester, where exactly do i replace the edited banner. I ask this because Ive found it impossible to line up perfectly the banners...or anything for that matter. Thanks for your help...sorry for annoying you with all these trivial questions. Dave Offset is 001D16CC, 11x60 tiles Import the internal palette offset 1927500 (Size 64, 9bpp BGR and Motorola) It is Palette 2 Make sure you are using a 30-team template rom Edited September 26, 2012 by PlabaxV2 Quote Link to comment Share on other sites More sharing options...
discodave0307 Posted September 26, 2012 Author Report Share Posted September 26, 2012 Ive been using the original......is there a patch or add on or is the 30 team rom somewhere to be found to download ? Quote Link to comment Share on other sites More sharing options...
discodave0307 Posted September 27, 2012 Author Report Share Posted September 27, 2012 Horaay! I did what you said above. Everything Is lined out and ready to edit. My only issue now is copying and pasting into tile mol over the original banners. When I made a new banner in paint and tried to paste it over the palette turned dark green and brown. hmmmm Quote Link to comment Share on other sites More sharing options...
PlabaxV2 Posted September 27, 2012 Report Share Posted September 27, 2012 Horaay! I did what you said above. Everything Is lined out and ready to edit. My only issue now is copying and pasting into tile mol over the original banners. When I made a new banner in paint and tried to paste it over the palette turned dark green and brown. hmmmm I think the problem is the colors you were using are not part of the palette that NHL94 requires you to use. The colors have to be from the default 16 color palette you can see in the picture I posted Quote Link to comment Share on other sites More sharing options...
discodave0307 Posted September 27, 2012 Author Report Share Posted September 27, 2012 PlabaxV2 This may be my final question. When I am happy with my banner in paint...how do I replace it over the original banners. When I tried to copy from paint it wouldnt paste in TMol. I think that is all for now....you will hope. Thnaks again Dave Quote Link to comment Share on other sites More sharing options...
PlabaxV2 Posted September 27, 2012 Report Share Posted September 27, 2012 PlabaxV2 This may be my final question. When I am happy with my banner in paint...how do I replace it over the original banners. When I tried to copy from paint it wouldnt paste in TMol. I think that is all for now....you will hope. Thnaks again Dave Since the banners are 88x16 in pixels, save the banner as a png file and make it 88x16 (make sure there is no white around it and that it is just the banner) In TM, when you can see all the banners go to Edit --> Paste From and paste the Png file you saved Quote Link to comment Share on other sites More sharing options...
discodave0307 Posted September 28, 2012 Author Report Share Posted September 28, 2012 OK All is good except that the only option palettes are blacks, purples and blues, there seems to be no multi colour palette though. This is ok? Quote Link to comment Share on other sites More sharing options...
discodave0307 Posted September 28, 2012 Author Report Share Posted September 28, 2012 Perfect... and I now have a choice of 3-4 palettes blues and purples and blacks Quote Link to comment Share on other sites More sharing options...
discodave0307 Posted September 28, 2012 Author Report Share Posted September 28, 2012 Ok sorted! Quote Link to comment Share on other sites More sharing options...
discodave0307 Posted October 1, 2012 Author Report Share Posted October 1, 2012 All is going well now I need to start work on the logos at the intro screen now but I notice that the palettes change to different colours in the game itself. Is there a universal or all round palette that can be used? Some logos are restricted to maybe 4 colours and I'd like to change them to totally different colours....any ideas? Quote Link to comment Share on other sites More sharing options...
PlabaxV2 Posted October 1, 2012 Report Share Posted October 1, 2012 All is going well now I need to start work on the logos at the intro screen now but I notice that the palettes change to different colours in the game itself. Is there a universal or all round palette that can be used? Some logos are restricted to maybe 4 colours and I'd like to change them to totally different colours....any ideas? The logos on the ice use the same palette as the home jersey. In NOSE choose what colours you want your jersey to be, and then you can use those colours in tile molester for the ice logos Quote Link to comment Share on other sites More sharing options...
discodave0307 Posted October 2, 2012 Author Report Share Posted October 2, 2012 The logos on the ice use the same palette as the home jersey. In NOSE choose what colours you want your jersey to be, and then you can use those colours in tile molester for the ice logos I've made some changes to an ice logo. It appeared without any issues. Then I changed a different team but I was back to square 1 when I went to play it in the game.The logos went back to their originals. Quote Link to comment Share on other sites More sharing options...
PlabaxV2 Posted October 2, 2012 Report Share Posted October 2, 2012 I've made some changes to an ice logo. It appeared without any issues. Then I changed a different team but I was back to square 1 when I went to play it in the game.The logos went back to their originals. Maybe you didn't save it correctly? I'm not too sure Sorry Quote Link to comment Share on other sites More sharing options...
discodave0307 Posted October 5, 2012 Author Report Share Posted October 5, 2012 Hi PlabaxV2, Do you know where I could find a rom for all round editing. I've been practising with 2-3 different ones cos some are limited with what I can edit...eg ice logos, palettes etc. Thanks Again, Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.