Jump to content
NHL'94 Forums

Rotating Center Ice Logo


Jkline3

Recommended Posts

Been discussing this on another thread but posting this separately (mostly so I can find again later...) in case anyone else cares to use.

redline.jpg

Changing the orientation of the center ice logo to match the layout of current NHL ice surfaces is pretty simple, you only need to rearrange the order of the tiles in a hex editor.

In Tile Molester, add your ice logos as usual, however rotate them -90 degrees and change your view from 6x4 to 4x6:

TM center ice.png

In a hex editor the following needs to be updated to change the orientation from horizontal to vertical:

Hex Map.png

If you want to bring the red line up to the logo and not leave blank space, change the top 2 pairs of circled 008F to 012B and the bottom 2 to 112B.

 

 

 

 

 

 

  • Thanks 3
  • Like 1
Link to comment
Share on other sites

  • 3 years later...
On 1/8/2020 at 12:07 PM, Jkline3 said:

Been discussing this on another thread but posting this separately (mostly so I can find again later...) in case anyone else cares to use.

redline.jpg

Changing the orientation of the center ice logo to match the layout of current NHL ice surfaces is pretty simple, you only need to rearrange the order of the tiles in a hex editor.

In Tile Molester, add your ice logos as usual, however rotate them -90 degrees and change your view from 6x4 to 4x6:

TM center ice.png

In a hex editor the following needs to be updated to change the orientation from horizontal to vertical:

Hex Map.png

If you want to bring the red line up to the logo and not leave blank space, change the top 2 pairs of circled 008F to 012B and the bottom 2 to 112B.

 

 

 

 

 

 

Is this appliable to NHL95?

Link to comment
Share on other sites

image.png

 

image.png

Replacing the 41 C2, 41 C7 with 01 54 

Replacing the 41 C8, 41 CD with 01 5B 

This allows the center ice red line to move up to the logo like you have done above.

Rearranging the bytes to go from 4x6 to 6x4 will be another thing to figure out. 

Link to comment
Share on other sites

OK... In hex editor you need to change the tiles as follows:

2023-03-16 21_46_08-Window.png

Find your current center ice logo:

2023-03-16 21_48_29-Window.png

Save a copy of your center ice logo and rotate it from a horizontal to a vertical format.

Change your tile layout from 6x4 to 4x6:

2023-03-16 21_48_40-Window.png

Paste the rotated logo into TM:

2023-03-16 21_48_54-Window.png

Should be good from there...

2023-03-16 21_51_01-Window.png

  • Wow 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...