<?xml version="1.0"?>
<rss version="2.0"><channel><title>Retroarch Latest Topics</title><link>https://forum.nhl94.com/index.php?/forum/268-retroarch/</link><description>Retroarch Latest Topics</description><language>en</language><item><title>Retroarch Technical Issues</title><link>https://forum.nhl94.com/index.php?/topic/39349-retroarch-technical-issues/</link><description><![CDATA[<p>Hey guys!</p><p>I was having some issues with Retroarch today. I'm streaming the Vancouver Canucks 1993-94 Season and my record was 9-2-0 so far. </p><p>But when I finished the scheduled game, I checked my record and it was 6-1-0.</p><p>The program also froze a few times during the stream as well. Any help figuring this out would be greatly appreciated!</p>]]></description><guid isPermaLink="false">39349</guid><pubDate>Wed, 03 Jun 2026 18:18:58 +0000</pubDate></item><item><title>2 controllers at the same time, man, that's what I'd do</title><link>https://forum.nhl94.com/index.php?/topic/38275-2-controllers-at-the-same-time-man-thats-what-id-do/</link><description><![CDATA[<p>
	<img alt="17cuKse.png" class="ipsImage" data-ratio="75.08" height="750" width="915" src="https://i.imgur.com/17cuKse.png">
</p>

<p>
	Have this persistent issue with RetroArch where every time I play a different version I have to update my controls. <br>
	<br>
	If I play with Genesis and save a remap file, I just load that when playing Genesis? If I'm playing SNES, I just load that? Isn't this supposed to work or am I missing something?<br>
	<br>
	I swear I'm not crazy - for this reason - but every time I switch playing one version over the other I have to redo all the binds again and it's maddening. <br>
	<br>
	Having to replug / unplug one every time isn't civilized. 
</p>
]]></description><guid isPermaLink="false">38275</guid><pubDate>Mon, 09 Feb 2026 15:35:17 +0000</pubDate></item><item><title>HOW TO: Netplay over RetroArch</title><link>https://forum.nhl94.com/index.php?/topic/18461-how-to-netplay-over-retroarch/</link><description><![CDATA[
<p>
	<strong><span style="font-size:24px;"><u>Netplay via RetroArch</u></span></strong>
</p>

<p>
	<span style="font-size:16px;">Netplay with RetroArch is very simple. Since RetroArch is a frontend for multiple emulator cores, setting up netplay for any core is very simple (as long as it supports it!), and is the same procedure.</span>
</p>

<p>
	<span style="font-size:16px;">For Genesis, we are using the Genesis Plus GX core for netplay.</span>
</p>

<p>
	<span style="font-size:16px;">For SNES, we are using the Snes9x core for netplay.</span>
</p>

<p>
	<span style="font-size:16px;">For installing RetroArch , please check out this page on nhl94online.com - <a href="http://nhl94online.com/html/getting-started.php" rel="external nofollow">Getting Started</a></span>
</p>

<p>
	<span style="font-size:16px;">The advantages to using RetroArch for netplay over Gens or ZSNES are numerous. Though ZSNES 1.42 has great netplay, we still require Hamachi for connections, since ZBattle does not exist anymore. Gens uses Kaillera for netplay, we still need Hamachi, and suffers from numerous lag, stutter, and desyncs, depending on the connection. </span>
</p>

<p>
	<span style="font-size:16px;">With RetroArch, we have 3 options, listed here with their pros and cons:</span>
</p>

<p>
	<span style="font-size:16px;"><strong>1. Direct Connect - </strong>With this type of connection, the 2 players connect directly to each other. Port forwarding is required in most cases, though if uPNP is enabled on your router, this may not be needed. Port that needs to be forwarded on your router is TCP 55435.</span>
</p>

<p>
	<span style="font-size:16px;"><u>Pros</u> - Best possible connection. With direct connect, you don't have to worry about any "middle-man" causing issues with the connection. </span>
</p>

<p>
	<span style="font-size:16px;"><u>Cons</u> - Hard to setup. Some cases, setting a Static IP for your PC and port forwarding on your router is required. Might not be possible for some setups (university, work, apartment, hotel, etc). You can look up how to port forward and set up Static IP for your router model online.  </span>
</p>

<p>
	<span style="font-size:16px;"><strong>2. Direct Connect w/ Hamachi - </strong>With this type of connection, Hamachi VPN is used as the "middle-man". This removes the need to port forward (in most cases). You need to install Hamachi and have it running before starting RetroArch. You also need to make sure you and your opponent are in the same "virtual network". </span>
</p>

<p>
	<span style="font-size:16px;"><u>Pros</u> - Good connection in most cases.  </span>
</p>

<p>
	<span style="font-size:16px;"><u>Cons</u> - Extra software needed. Using a "middle-man", you are at the mercy of the connection quality. There are times in the past where Hamachi caused problems for some, and direct connect was found to be the better solution. Since the signal is routed to a Hamachi VPN server before going to each player, there may be more latency in the connection (higher ping) than direct connect.</span>
</p>

<p>
	<span style="font-size:16px;"><strong>3. Relay Server - </strong>With this type of connection, both players connect to a "middle-man" relay server, hosted by RetroArch. No extra software needed, all you need to do is turn on the relay server option in Settings-&gt;Network.</span>
</p>

<p>
	<span style="font-size:16px;"><u>Pros</u> - Good connection. Easy to setup. No port forwarding or Static IPs needed. Just connect and play.</span>
</p>

<p>
	<span style="font-size:16px;"><u>Cons</u> - Since there is a "middle-man" server, all connections are routed through there. There are 2 server locations currently, one in NY, one in Spain (the NY one is the default). Connection is a little tricky, since the person connecting to the host (the client), has to wait until the host connects to the server (connected to "NICK" message). Sometimes, it is a little finicky and I've noticed I needed to close RetroArch and restart it to get the message. Most of the time it works though. Also, if there is a disconnection, the host has to wait until their name disappears from the Netplay List (~45 sec.) before trying to host again.</span>
</p>

<p>
	 
</p>

<p>
	<span style="font-size:16px;">In a perfect world, everyone would use direct connect, but there are some cases where it's not feasible.</span>
</p>

<p>
	 
</p>

<p>
	<span style="font-size: 20px;"><b><u>Netplay - How it Works</u></b></span>
</p>

<p>
	<span style="font-size:16px;">RetroArch uses rollback netplay (some of you might not like this). This is very big in the fighting game community. The goal of rollback netplay is too keep the experience "lag-free" as possible. This makes the game play very smooth. If there is a lag spike, the game will actually "rewind", to the point where if someone scored during a MAJOR lag spike, it erases the goal (hehe). It's less noticable than you would think, except in major cases. But, it's very hard to desync, and if you do desync, you can reconnect, and continue play where you left off, or the host can even load a save state while you are connected (ZSNES did this as well). Thus, the advantage of recovering from a desync and the overall smoother play should make everyone happy.</span>
</p>

<p>
	<span style="font-size:16px;">Beforehand, you should ask your opponent if you would like to use the relay server or direct connect. Direct connect may work without Hamachi/port forwarding, but it is not guaranteed. Currently, I recommend using the relay server. If you downloaded the package from nhl94online.com, the relay server option is already enabled. Relay server can be set to off in Settings-&gt;Network</span>
</p>

<p>
	<span style="font-size:16px;"><strong><span style="color:#c0392b;">Make sure you also have the SAME EXACT ROM!!! If not, there will be a disconnect and an error along the lines of "Cannot retrieve header".</span></strong></span>
</p>

<p>
	 
</p>

<p>
	<span style="font-size:20px;">1. <strong>The player acting as the host (home team on Genesis, either team on SNES) starts the game -</strong></span><strong style="font-size: 16px;"> </strong>
</p>

<p>
	<font size="3">Load the ROM, either using the "Load Core...", then "Load Content..." window or the "Load Recent" menu (if you've played the game before). Use F1 to enter the Quick Menu. Hit the backspace key (or button assigned to B on your controller) to back out to the Main Menu. Select Netplay, Host, Start Netplay Host. (You can also use the "N" key on your keyboard to toggle netplay hosting)</font>
</p>

<p style="text-align: center;">
	<img alt="Netplay Window.png" class="ipsImage ipsImage_thumbnailed" data-fileid="9244" data-unique="dhwgcygwr" style="width: 400px; height: auto;" src="https://forum.nhl94.com/uploads/monthly_2018_05/287608164_NetplayWindow.png.22d4f58ff578ae1437aefb478523449c.png"></p>

<p>
	 
</p>

<p>
	<font size="3">When the game starts up, you should see a few messages on the bottom of the screen. Look for one that says "Connected to NICK". NICK is name of the relay server (if you are using direct connect, you will not see this message). Almost immediately after, you should see "Joined as Player 1". This is a good sign. You can now notify your opponent that they are able to connect to you. Again, you do not see this using direct connect; instead, you will see a message saying "waiting for client...". At this point, you can notify your opponent.</font>
</p>

<p style="text-align: center;">
	<img alt="Nick.PNG" class="ipsImage ipsImage_thumbnailed" data-fileid="9981" data-unique="nkl2ttbqq" style="width: 400px; height: auto;" src="https://forum.nhl94.com/uploads/monthly_2018_10/Nick.PNG.5fe284fe6a0151c7973b432e08c5d1a8.PNG"></p>

<p style="text-align: center;">
	<span style="color:#c0392b;"><strong><span style="font-size:16px;">If they try to connect before you see these messages, it's very possible it will not connect.</span></strong></span>
</p>

<p>
	<span style="font-size:16px;">At this point, just let the game sit there until your opponent connects. I usually wait at the in-game main menu.</span>
</p>

<p style="text-align: center;">
	 
</p>

<p>
	<span style="font-size:20px;">2. </span><strong><span style="font-size:20px;">The player acting as the client (away team on Genesis, the person not hosting on SNES) connects to the host - </span></strong><span style="font-size:16px;">The player who will be connecting to the host will now go to Netplay in the Main Menu and select "Refresh Room List". You will see a list populate like below. Look for the name of the person you are playing, and select them. You do not need to have the ROM already open (it's optional). When you select their name, the game (as long as it is on your "Load Recent" list, i.e. you've loaded it once before) will automatically start up. When you connect, you should see a message, and it will say "You have joined as player 2".</span>
</p>

<p style="text-align: center;">
	<img alt="netplay list.PNG" class="ipsImage ipsImage_thumbnailed" data-fileid="9982" data-unique="i0r0t8xxv" style="width: 400px; height: auto;" src="https://forum.nhl94.com/uploads/monthly_2018_10/1681903901_netplaylist.PNG.6cce675791fde747809d1d198a92a871.PNG"><span style="font-size:14px;"> </span>
</p>

<p>
	 
</p>

<p>
	<span style="font-size:20px;">3. <strong>Save the state at the end of the game -</strong></span><span style="font-size:16px;"><strong> </strong>Play the game, at the end of the game, <strong>either on the 3-stars screen, or the game end menu</strong>, make a save state (press F5). This will be used to upload to the nhl94online.com site. Check this post for more information - </span>
</p>
<iframe allowfullscreen="" class="ipsEmbed_finishedLoading" data-controller="core.front.core.autosizeiframe" data-embedcontent="" data-embedid="embed3740541719" scrolling="no" src="https://forum.nhl94.com/index.php?/topic/18493-how-to-create-a-save-state-in-retroarch/&amp;do=embed" style="overflow: hidden; height: 339px; max-width: 502px;"></iframe>

<p>
	<span style="font-size:16px;"><strong><span style="color:#c0392b;">The "Connect to netplay host" option in the Netplay menu is not used. This asks you to put an IP address in. You do not need it, as you can use the Room List instead.</span></strong></span>
</p>

<p>
	 
</p>

<p>
	<u><strong><span style="font-size:24px;">Troubleshooting</span></strong></u>
</p>

<p>
	<strong><span style="font-size:20px;">Cannot connect, keeps saying "Connected as Player 1" for the client -</span> </strong><font size="3">If there is an issue and you did not connect, it will either give you an error, or it will just say " Connected as Player 1", and start loading the beginning of the game, which means you did not connect to the host. At this point, both players will need to go back into the Netplay menu, the host will "Stop netplay host", and the client will "Disconnect from netplay host". If using the relay server, the host has to wait about 45 sec or so before trying again (so the game is removed from the netplay host list). You can check by selecting "Refresh Room List" and checking until the host's name disappears (both can see this). (</font><strong style="font-size: 16px;">See "Game Desync") </strong><font size="3">I suggest the host waiting to tell the opponent to connect once he reaches the Setup Game Screen. <strong>If using Direct Connect, you can re-host almost immediately</strong>.</font>
</p>

<p>
	<strong><span style="color:#d35400;"><span style="font-size:16px;">NOTE: Both players have to be using the same RetroArch version, the same core version, and the same exact ROM in order to play together. If, for some reason, you are using anything other than the package provided on nhl94online.com for netplay, it will not work.</span></span></strong>
</p>

<p>
	<span style="font-size:16px;"><b>Game Stutters - </b> I noticed this occurs right when first connecting. It takes a few frames for the 2 games to sync up, so you may see some graphic glitches and menu stuttering. It goes away once you start actually playing.</span>
</p>

<p>
	<span style="font-size:16px;"><b>Game Desync - </b> If you desync, you will see a message "Netplay Disconnected". This happens mostly when one of the players have the emulator paused for a long period of time (I'd say 10 sec or so), or if the internet drops out. If you disconnect, the host should keep the game running, pause (hit Start to go to the in-game menu), make a save state just in case, pull up the Quick Menu (F1 button), back out to the Main Menu, and select Netplay. Then, select "Stop netplay host". Then select "Refresh room list", every few seconds or so, until you see your name disappears from the list (the netplay server dumps the game from the server, like above). <strong>If using Direct Connect, you can re-host almost immediately</strong>. After this, you can select "Start netplay host", wait till you see the "Connected to NICK", "Joined as Player 1", "waiting for client..." messages, and notify your opponent that they can reconnect now. </span>
</p>

<p>
	<span style="font-size:16px;">The client, in the meantime, should back out to the Main Menu, go to Netplay, and select "Disconnect from netplay host", wait for their opponent to notify them, and then reconnect to the host. Once connected, you will both be at the point where the host paused the game, and can continue.</span>
</p>

<p>
	<strong><span style="color:#c0392b;"><font size="3">If there is an issue, and the client cannot reconnect to the live game, or if the host closes the game at some point, reconnect as stated above, and once connected, the host can load the save state. Once the save state is loaded, you can continue play. No more need to game stitch or restart if there is a desync!!</font></span></strong>
</p>

<p style="text-align: center;">
	 
</p>

<p>
	<span style="font-size:16px;">Please let me know if there are any issues!</span>
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>
]]></description><guid isPermaLink="false">18461</guid><pubDate>Thu, 24 May 2018 19:50:41 +0000</pubDate></item><item><title>Players go missing on edges of screen NHL 98 - (Genesis Plus GX Wide)</title><link>https://forum.nhl94.com/index.php?/topic/34813-players-go-missing-on-edges-of-screen-nhl-98-genesis-plus-gx-wide/</link><description><![CDATA[<p>
	So I recently discovered the magic of RetroArch, in particular the Core <a href="https://www.libretro.com/index.php/genesis-plus-gx-wide-now-available-for-libretroretroarch/" rel="external nofollow">RetroArch with Genesis Plus GX Wide</a> which gives us the ability to use up all the wasted real estate on both sides of the screen. For NHL games on Genesis, this is a nice feature considering that the game uses a camera to pan over an area that is larger than the field of view. We can now play with the entire horizontal area of the rink exposed at all times, instead of the panning view we are accustomed to with the camera that follows the player positions. <br>
	<br>
	There is a setting in <span data-darkreader-inline-color="" style="color: rgb(155, 89, 182); --darkreader-inline-color: #a467bc;">Quick Menu &gt; Core Options &gt; Video &gt; Extra Columns to draw in H40 for widescreen</span> which allows us to determine how much extra space we are going to use on the sides of the screen. I have found that on my 16:9 TV a value of <strong>12</strong> works well, as it essentially keeps the entire horizontal area of the rink in view at all times without zooming too far out. <br>
	<br>
	<span style="font-size:20px;"><strong>The Problem</strong></span><br>
	Now the one bug that I have found with this is that sometimes the players (on whichever team) will pop in and out of view. That is to say, they will become <strong>completely invisible</strong>. This only happens in the areas of the rink that are on the edges, where the extra real estate is. One guess I have about this is that the game may not always draw models when they are out of view, so what would normally be hidden (player's being despawned). This is something that game devs have implemented for a long time to save on polygons eating up GPU power, but I am not sure this is the case here, because I don't even think this game uses polygons (I think it uses sprites?). In any case, its something related to player visibility and the edges of the camera that follows the players/puck. <br>
	<br>
	So I am not sure how to address this, but its kind of lame. I mean, I LOVE that I now have all this extra real estate, but having the players disappear is not a very desirable outcome. Has anyone else noticed this before? I'd love to hear from anyone playing on the <a href="https://www.libretro.com/index.php/genesis-plus-gx-wide-now-available-for-libretroretroarch/" rel="external nofollow">RetroArch with Genesis Plus GX Wide</a> core and what their experiences have been like. I night test some other NHL titles, but right now I only have 94 to test it on. <br>
	<br>
	Thanks!
</p>
]]></description><guid isPermaLink="false">34813</guid><pubDate>Fri, 15 Nov 2024 03:39:11 +0000</pubDate></item><item><title>RetroArch Setup Guide</title><link>https://forum.nhl94.com/index.php?/topic/18460-retroarch-setup-guide/</link><description><![CDATA[<p>
	<font color="#c0392b"><span style="caret-color: rgb(192, 57, 43); font-size: 28px;"><b>There is an updated guide on nhl94online.com - <a href="http://nhl94online.com/html/getting-started.php" rel="external nofollow">Getting Started</a>. Please use the guide there!</b></span></font>
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	<font color="#c0392b"><span style="caret-color: rgb(192, 57, 43); font-size: 28px;"><b>---------------------------------------------------------------------</b></span></font>
</p>

<p>
	<span style="font-size:24px;"><u><strong>How to install RetroArch on PC</strong></u></span>
</p>

<p>
	<span style="font-size:20px;">1. <strong>Download RetroArch from nhl94online.com</strong> - </span><a href="http://nhl94online.com" ipsnoembed="true" rel="external nofollow">http://nhl94online.com</a>.  Current version - 1.8.8
</p>

<p>
	Download the installer. Those who will be playing SNES online are also able to use the Mac version.
</p>

<p>
	 
</p>

<p>
	<span style="font-size:20px;">2. </span><strong><span style="font-size:20px;"> Extract the folder -</span></strong><span style="font-size:20px;"> </span>Extract the folder and place it where you would like. I recommend the Desktop.
</p>

<p style="text-align: center;">
	 
</p>

<p>
	 
</p>

<p>
	<span style="font-size:20px;">3. <strong>Start RetroArch -</strong> </span>The config file that comes in the package is good out-of-the-box for most setups. There may be some changes needed. This will be covered later on. Connect your controller to your PC. It may be recognized out of the box and be pre-configured. You will see a message that says "<strong>(Name of controller) configured in Port #0</strong>". If so, you can skip Step 4.  If you see "<strong>(Name of controller) in Port #0 not configured</strong>", please follow Step 4.
</p>

<p>
	 
</p>

<p>
	<span style="font-size:20px;">4. </span><b><span style="font-size:20px;">Setup Controller -</span> </b>You can use your controller to navigate the menus. This is a little bit confusing, so I will explain it first. The button layout for the controller is the same as what RetroArch calls a "RetroPad". The RetroPad is similar to an SNES controller, with analog joysticks and 2 sets of shoulder buttons. We DO NOT need to define all of the controller inputs, so you only need to set the ones you will use. Unfortunately, a Genesis controller has a 3 or 6 button layout, and the names of the buttons do not match the buttons on the Genesis controller.
</p>

<p>
	<strong><font color="#e74c3c" size="3">Before you try to set up your controller, there is a good chance it will work out of the box. RetroArch has many preconfigured controller configurations saved. You can test it by using the directional pad and trying to navigate the menu. </font></strong>
</p>

<p>
	<strong><font color="#e74c3c" size="3">If your controller works, skip this step and go to Step 6. </font></strong>
</p>

<p>
	<strong><font color="#e74c3c" size="3">It seems all of the RetroUSB products, most other popular Genesis USB adapters, iBuffalo controllers, <span style="caret-color: rgb(231, 76, 60);">Xbox</span> 360 and One, and PS4 controllers work out of the box. There are many more too, please post if they work! </font></strong>
</p>

<p>
	For more info and to look at common controller layouts, you can look at this - <a href="https://github.com/RetroPie/RetroPie-Setup/wiki/RetroArch-Configuration" rel="external nofollow">RetroArch Common Controller Button Layouts</a>
</p>

<p>
	Here are the 2 types of Genesis controllers and their assigned button names in RetroArch. The labels in the photos correspond to the Input labels in the program. SNES is easy, as the layout is the same as the RetroPad, and you can just ignore the extra button inputs:
</p>

<p style="text-align: center;">
	<img alt="Genesis 3 Button.png" class="ipsImage ipsImage_thumbnailed" data-fileid="9234" data-unique="gxkwgpot1" style="width: 640px; height: auto;" src="https://forum.nhl94.com/uploads/monthly_2018_05/613681105_Genesis3Button.png.ef90fade2ddf04b4b04ad7df7066ec63.png"><img alt="Genesis 6 Button.png" class="ipsImage ipsImage_thumbnailed" data-fileid="9233" data-unique="fzzom0hl1" style="width: 640px; height: auto;" src="https://forum.nhl94.com/uploads/monthly_2018_05/1619595056_Genesis6Button.png.6081b1f9629db96fd6a3afe0d201ec1a.png"></p>

<p>
	So, to set the buttons, in the Main Menu, go to Settings-&gt;Input. The following window will open. I recommend changing the "Menu Toggle Gamepad Combo" to something so you can access the Menu easier during a game if needed.
</p>

<p style="text-align: center;">
	<img alt="Menu Toggle Gamepad Combo.png" class="ipsImage ipsImage_thumbnailed" data-fileid="9229" data-unique="dme5i20dq" style="width: 640px; height: auto;" src="https://forum.nhl94.com/uploads/monthly_2018_05/1480147359_MenuToggleGamepadCombo.png.9607c0af9a98de78dd220a765abc5fd0.png"></p>

<p>
	<span style="font-size:16px;"> <strong>Select "Port 1 Binds". If your controller does not have analog sticks, make sure "User 1 Device Type" is set to "RetroPad". If your controller has analog sticks, and you would like to use them, change the "User 1 Device Type" to "RetroPad w/analog"</strong></span>. Set your buttons separately, by scrolling down to the button and pressing the Enter key on the keyboard. Then, press the button on the controller to assign it. You only need to set the buttons that are used to play (ignore all the others). 
</p>

<p>
	<span style="color:#e74c3c;">So, for example, if you have a Genesis USB controller, "User 1 Y button" should be assigned to your controller's A button, "User 1 B button" assigned to the B button, and "User 1 A button" assigned to the C button, "Start button" to Start, and the "D-pad" to the directional pad. Once you are done assigning buttons, the controller can now be used to navigate the menu (<strong>I think the button assigned to A makes selections, and the button assigned to B will back out</strong>).</span>
</p>

<p style="text-align: center;">
	<img alt="User Input.png" class="ipsImage ipsImage_thumbnailed" data-fileid="9230" data-unique="f4a2h2nrs" style="width: 640px; height: auto;" src="https://forum.nhl94.com/uploads/monthly_2018_05/135271858_UserInput.png.d4dc34f068d2e77cfac56b4c0b181f83.png"></p>

<p>
	 
</p>

<p>
	<span style="font-size:16px;"><strong>Go up to "User 1 Save Autoconfig" and select it to save the configuration. Then your controller setup will be saved.</strong></span>
</p>

<p>
	 
</p>

<p>
	<span style="font-size:20px;">5. </span><strong><span style="font-size:20px;">Load Core and Content (a ROM) </span>- </strong>For the first time you play a ROM, you need to load the core, then load content in order to play. A ROM is considered "Content". So back at the Main Menu, select "Load Core...", then select the core to load. After selecting a core, it will list it in the bottom left corner of the screen.
</p>

<p>
	Next, we need to load the ROM. The ROMs used for NHL94 are preloaded in the package you downloaded. Select "Load Content", then select "Start Directory". There, you will see a "Genesis" and "SNES"  directories. Select the one you plan on using to play. Then, select the ROM. The game will load.
</p>

<p>
	To quit the ROM, you need to access the "Quick Menu". The Quick Menu is only available when a ROM is loaded. You can use the button combination that you set before, the F1 key, or go to the top Menu Bar, "Command-&gt;Menu Toggle". In the Quick Menu, you can see how you can save or load a state, or Quit the game ("Close Content"). 
</p>

<p>
	<b><span style="font-size:16px;">You can actually hit the back button (B button on controller) in the Quick Menu to access the Main Menu, a trick which will be used for Netplay</span>.</b>
</p>

<p>
	 
</p>

<p>
	<strong><span style="font-size:18px;"><span style="color:#e74c3c;">Once the core and the ROM have been loaded once, the combination will show up in "Load Recent" on the Main Menu. Once it is listed there, you never have to load the core and content separately, you can just go to "Load Recent", choose the ROM and everything will load automatically.</span></span></strong>
</p>

<p>
	 
</p>

<p style="text-align: center;">
	<img alt="Quick Menu Game.png" class="ipsImage ipsImage_thumbnailed" data-fileid="9235" data-unique="pcs2nj8yq" style="width: 640px; height: auto;" src="https://forum.nhl94.com/uploads/monthly_2018_05/1565587474_QuickMenuGame.png.a091d50e97e087dbf749e2d8da5c97f6.png"></p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	<font size="5"><b><u>Troubleshooting</u></b></font>
</p>

<p>
	<font size="4"><b>Please see the Troubleshooting post - </b></font>
</p>
<iframe allowfullscreen="" class="ipsEmbed_finishedLoading" data-controller="core.front.core.autosizeiframe" data-embedauthorid="93" data-embedcontent="" data-embedid="embed5154120236" scrolling="no" src="https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/&amp;do=embed" style="overflow: hidden; height: 387px; max-width: 502px;"></iframe>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	<a class="ipsAttachLink" data-fileext="cfg" data-fileid="9358" href="https://forum.nhl94.com/applications/core/interface/file/attachment.php?id=9358" rel="">retroarch.cfg</a>
</p>]]></description><guid isPermaLink="false">18460</guid><pubDate>Thu, 24 May 2018 18:24:59 +0000</pubDate></item><item><title>Recording in RetroArch and Creating Animated GIFs</title><link>https://forum.nhl94.com/index.php?/topic/20147-recording-in-retroarch-and-creating-animated-gifs/</link><description><![CDATA[<p>
	I recorded a tutorial video last night that shows how I record my gameplay in RetroArch and then edit the file in order to create animated GIFs:
</p>

<p>
	 
</p>

<div class="ipsEmbeddedVideo" contenteditable="false">
	<div>
		<iframe allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen="" frameborder="0" height="270" src="https://forum.nhl94.com/applications/core/interface/index.html" width="480" data-embed-src="https://www.youtube.com/embed/1Iq1a63TeEw?feature=oembed"></iframe>
	</div>
</div>

<p>
	 
</p>]]></description><guid isPermaLink="false">20147</guid><pubDate>Wed, 07 Oct 2020 12:17:15 +0000</pubDate></item><item><title>GUIDE: RetroArch and dealing with lag</title><link>https://forum.nhl94.com/index.php?/topic/19953-guide-retroarch-and-dealing-with-lag/</link><description><![CDATA[<p>
	There are 2 major forms of latency (or lag, whichever you'd like to call it):
</p>

<p>
	 
</p>

<p>
	<u><strong>Input Latency</strong></u> - The delay from pressing a button, to the display of that button action on the screen. 
</p>

<p>
	<strong><u>Network Latency</u></strong> - The delay in communication from one computer to another. In our case, the amount of time it takes to for one player's button press to show up on the other player's screen.
</p>

<p>
	Latency is usually displayed in ms (milliseconds).
</p>

<p>
	 
</p>

<p>
	An emulator displays video by frames. Most emulators use an ~60Hz refresh rate (similar to the consoles they emulate), which means it displays 60 video frames per second. The video on the screen refreshes every 16.7ms (1 second / 60 frames = 16.7ms). So, the fastest an emulator can show a change on the screen is 16.7ms.
</p>

<p>
	This may seem like very little time, but in regards to computer processing, this is a ton of time. A lot of things happen within those 16.7ms, one of which is preparing for the next video frame.
</p>

<p>
	<u><span style="font-size:18px;"><strong>Input Latency</strong></span></u>
</p>

<p>
	The emulator checks for controller input during a specific time during a frame. If the input arrives before that time, it will update the video on the screen. How soon you see a reaction to your input is called the input latency.
</p>

<p>
	Many things can factor into this: 
</p>

<ul><li>
		<u>Controller</u> - Your USB/Bluetooth/wireless controller polls the button inputs every couple of ms. Some poll quicker than others (2-4 ms), some take longer than others (11-16ms). This contributes to input lag. On top of that, the PC will poll the controller, which also contributes to input lag (though this is usually 1-2 ms). So, when you press the button, the controller polls the buttons to see what was pressed, and then the PC polls the controller to get the input. This is not instant.
	</li>
	<li>
		<u>Emulator</u> - Depending on how well the emulator is coded, some of them can contribute to input lag. It can receive the input from the PC, but it may take a frame or 2 before it updates the video to show the input.
	</li>
	<li>
		<u>Display</u> - Depending on your monitor or TV, there could be a delay added. HDTVs especially, since there is some upscaling of the video involved in order to display it (this can add a few frames). Computer monitors are usually lag-free.
	</li>
</ul><p>
	 
</p>

<p>
	Regardless of all the latency added above, the emulator still checks for input every 16.7ms. So if you press the button, if it gets to the emulator in time, it will display it. The problem is this: It only checks every 16.7ms. So, if you press the button mid-frame (8ms), and your input latency adds up to 10ms, the total is 18ms (10ms latency, 8ms to press the button), and you will miss the frame. Your input has to wait for the next frame to show up.
</p>

<p>
	 <span style="color:#c0392b;">The best way to think of the above is this way: Imagine you need to get on the bus. A bus comes by every 16.7ms to pick people up. It takes 10ms for you to get to the bus stop from your house (your latency). Depending on the time you leave your house (press a button), will depend on what bus (frame) you make.  </span>
</p>

<p>
	If you are curious as to the input lag of your controller (the first part of above), you can look it up on the internet. A lot of people have done tests of controllers. For example, the wired retro-bit controllers come in around 10ms, where as a wired 8bitdo M30 2.4g<span style="color:#c0392b;"> </span>has about 3-4ms.
</p>

<p>
	 
</p>

<p>
	<u><span style="font-size:18px;"><strong>Network Latency</strong></span></u>
</p>

<p>
	Network latency is the amount of time it takes for communication between 2 PCs. This comes into effect during Netplay, when 2 PCs are sending inputs back and forth. 
</p>

<p>
	Latency increases with distance (the further the signal has to travel, the more latency there most likely will be), but there are many other factors that can cause latency:
</p>

<ul><li>
		<u>Wifi</u> - A wireless signal from a PC to a router can be affected by many things. Walls, interference from microwaves (microwaves use the same frequency as most Wifi routers), interference from wireless landline phones (same frequency), distance from PC to router, devices on Wifi, etc. You can have the fastest internet and Wifi router in the world, but it will not make a difference. Wifi adds lag, and since it isn't consistent lag, it makes it even worse.
	</li>
	<li>
		<u>Jitter</u> - Your internet speed is not important when it comes to gaming. You can have 1GBit download and upload speeds, but what matters most is jitter, or stability. Input lag is usually consistent, in other words, stable. Your eye can easily adjust to it after a minute or so. Network jitter causes instability, where the network lag constantly changes. There are many things that can cause this, though most are out of your hands. You can check your network jitter using online tests such as speedtest.net. Note, this will change (you will get different results every time you run it), but the goal is to have jitter that is less than 8ms or so. One of the only ways you can control jitter is by using a wired connection for internet, between your PC and router. Other than that, you are at the mercy of your Internet Service Provider (ISP).
	</li>
	<li>
		<u>Local Network Load</u> - This is a problem again you may have some control over. The amount of devices using internet on your local network can cause a load on the router, where the router has to decide what devices to let through at a given time. Sometimes, your PC will be at the top of the list, sometimes on the bottom. The router decides what is most important. Sometimes, some routers have settings that give priority to gaming. Usually, this isn't much of a problem, but it could be.
	</li>
	<li>
		<u>ISP Network Load</u> - You have no control over this. This depends on how many people are using the internet at a given time. In a case when a pandemic is going on, internet usage goes up, causes a network load, and everything slows down. Peak times (after work hours) will also cause issues with network traffic. 
	</li>
</ul><p>
	 
</p>

<p>
	Some people just have crappy internet service providers, and it might be their only option. In these cases, you just have to limit what you can. Again, speed doesn't matter, this game could be played using a 1200 baud modem no problems. The amount of data passed between PCs is just inputs, and occasionally save states. The most important thing is stability. If the Network Latency is constant, it can be dealt with easier than if it is constantly changing.
</p>

<p>
	 
</p>

<p>
	Both Input Latency and Network Latency are added together when it comes to Netplay. So if we use our bus analogy:
</p>

<p>
	<span style="color:#c0392b;">Imagine you need to get on the bus. A bus comes by every 16.7ms to pick people up. It takes 10ms for you to get to the bus stop from your house (your input latency). But now, there's traffic along the way (your network latency). Depending on the time you leave your house (press a button), and depending on how bad the traffic is at that time (network latency), will determine what bus you get on (what frame).</span>
</p>

<p>
	 
</p>

<p>
	<u><span style="color:#c0392b;"> </span><span style="font-size:18px;"><strong>RetroArch Netplay</strong></span></u>
</p>

<p>
	<b>Like I said above, your Input Latency (which is local to you) and Network Latency (between you and your opponent) affect your Netplay experience. </b>
</p>

<p>
	RetroArch netplay, the way it works in a nutshell, is it checks frame by frame to see if it receives an input from the opponent. It also keeps track of what frame you and your opponent are on, and compares. When you connect to each other, it starts frame counting. So, when you press the B button on Frame 123, it sends that information to your opponent. When your opponent is on Frame 123, it receives your B button press, and shows it on the screen on the next frame (124), just when it would show on yours as well. In a perfect world, every button press on a frame would be registered on the same frame for your opponent, without problems.
</p>

<p>
	But, what happens when you press your B button and it's showing your pass on Frame 123, but it doesn't get to your opponent until Frame 125? This is the effect of latency. What RA does in this case, is rewind to Frame 123, show your B button press, and continue. Now in this case, there is 2 frames of lag (which is ~33ms). The rewind may go unnoticed in this case. But, lets say the frame difference was 10 frames. That's 166.7ms. That may be noticeable to  the player. In this case, what they see is a skip, or "rubber-banding" where the skaters rewind back 10 frames, then continue. (Note: more goes on than just rewind, just keeping it simple here)
</p>

<p>
	<strong>The short frame rewinds make it seem like input lag. Many players complaining about input lag are probably experiencing this. The larger frame rewinds are more noticeable and look like skips.</strong>
</p>

<p>
	In other emulators, what would happen in this case, is the game would stutter and hang until one side caught up to the other. If the frame difference was large, the game would de-sync.
</p>

<p>
	 
</p>

<p>
	<u><span style="color:#c0392b;"> </span><span style="font-size:18px;"><strong>Input Latency Frames and Run-Ahead</strong></span></u>
</p>

<p>
	RetroArch can deal with latency in 2 ways - Input Latency Frames (used to help with network latency) and Run-Ahead (used to help with input latency).
</p>

<p>
	Remember, Netplay expect the input from each player to arrive on the same frame. This is unrealistic. In some cases, when people playing against each other are very close geographically, this is possible (as long as all latency equals to less than a frame - 16.7ms, this works). In cases when playing across North America, expect network latency to be in the 20-80ms range.
</p>

<p>
	Adding Input Latency Frames allows some time for Netplay to expect the input. If we add 2 Input Latency Frames, for example, when we press B on Frame 123, it sends the press on Frame 123, but delays showing it until Frame 126 (pressed on 123, would originally show on 124. 124 +2 frames = 126). This way, the opponent's PC can wait for the input on Frame 125, showing it on 126, giving it 3 frames total of travel (Frame 123, 124, 125).
</p>

<p>
	Gens Kaillera Netplay and ZSNES both add 2 input latency frames automatically. Gens adjusts by adding more if needed (depends on ping).
</p>

<p>
	By default, Input Latency Frames is set to 0 in RA.
</p>

<p>
	 
</p>

<p>
	Run-Ahead works locally, by removing input latency frames. By turning Run-Ahead on, you remove at least 1 frame of input latency (you can set it higher if you'd like). It's one of best features of RA. By default, it's turned off.
</p>

<p>
	 
</p>

<p>
	<u><span style="font-size:18px;"><strong>TL;DR:</strong></span></u>
</p>

<p>
	So how can we use these to help improve Netplay experience? We can add Input Latency Frames, and remove some of them locally using Run-Ahead, to give us a near lag-free (in most cases) experience.
</p>

<p>
	<strong><u>Example</u></strong>:
</p>

<ul><li>
		If we set Input Latency Frames to 2, and set Run-Ahead to 1, we essentially add 1 frame of input latency locally (2 input frames - 1 run-ahead frame = 1 total).
	</li>
	<li>
		This gives the network 2 frames to play with as far as receiving data, but we only see a difference of 1 frame while playing. This is not noticeable. Even 2 frames is hard to notice.
	</li>
	<li>
		NOTE: Adding Run-Ahead frames becomes CPU intensive. You can experiment with it, but 1 or 2 frames should be more than enough.
	</li>
	<li>
		NOTE: When it comes to adding Input Latency Frames, <strong>both players</strong> <strong>have to have this set to the same value. Confer with your opponent beforehand as to how many you will set.</strong>
	</li>
	<li>
		Run-Ahead is local only, so this doesn't matter if the values are different between players.
	</li>
</ul><p>
	 
</p>

<p>
	<u><span style="font-size:18px;"><strong>Setting Input Latency Frames</strong></span></u>
</p>

<ol><li>
		<span style="font-size:16px;"><strong>Start RetroArch</strong></span>
	</li>
	<li>
		<span style="font-size:16px;"><strong>Discuss with your opponent how many latency frames you'll be using (I recommend starting with 1 or 2, that should be enough in most cases).</strong></span>
	</li>
	<li>
		<span style="font-size:16px;"><strong>Once decided, go to Netplay-&gt;Network.</strong></span>
	</li>
	<li>
		<span style="font-size:16px;"><strong>Set Input Latency Frames to the value decided (2 as shown below).</strong></span>
	</li>
</ol><p>
	<img class="ipsImage ipsImage_thumbnailed" data-fileid="12508" data-ratio="74.50" data-unique="ak8fq4ijx" style="width: 600px; height: auto;" width="962" alt="Input Latency Frames.png" src="https://forum.nhl94.com/uploads/monthly_2020_07/687974417_InputLatencyFrames.png.33761141aff13789365fb10eb8c606ca.png"></p>

<p>
	<strong><font size="4"><font color="#c0392b">NOTE: Leave "Input Latency Frames Range" to 0. Only set the Input Latency Frames. Also, the Input <span style="caret-color: rgb(192, 57, 43);">Latency</span> Frames setting is saved when exiting RA. So make sure you check it before playing, if you'd like to change it again.</font></font></strong>
</p>

<p>
	 
</p>

<p>
	<u><span style="font-size:18px;"><strong>Enabling Run-Ahead</strong></span></u>
</p>

<ol><li>
		<span style="font-size:16px;"><strong>Start RA.</strong></span>
	</li>
	<li>
		<font size="3"><b>Go to Settings-Latency</b></font>
	</li>
	<li>
		<font size="3"><b>Turn "Run-Ahead to Reduce Latency" to ON</b></font>.
	</li>
</ol><p>
	<img class="ipsImage ipsImage_thumbnailed" data-fileid="12509" data-ratio="74.50" data-unique="dduy8a35k" style="width: 600px; height: auto;" width="966" alt="Run-Ahead.png" src="https://forum.nhl94.com/uploads/monthly_2020_07/Run-Ahead.png.dc479423b6710d14091852493da615d7.png"></p>

<p>
	 
</p>

<p>
	<strong><span style="font-size:18px;">I recommend using 2 Input Latency Frames, and 1 Run-Ahead Frame as a starting point. Switch to 1 Input Latency Frame when playing someone who is closer to you. Again, confer with your </span></strong><font size="4"><b>opponent, as it's important that your Input Latency Frames are the same value!</b></font>
</p>]]></description><guid isPermaLink="false">19953</guid><pubDate>Mon, 27 Jul 2020 03:44:37 +0000</pubDate></item><item><title>On screen netplay notifications in Retroarch</title><link>https://forum.nhl94.com/index.php?/topic/26504-on-screen-netplay-notifications-in-retroarch/</link><description><![CDATA[<p>
	I see the standard notifications (fps, ping etc) and of course you get quick notifications regarding netplay players joining and disconnecting.
</p>

<p>
	Would there be a way to display all members of the netplay room in a corner of the screen? 
</p>

<p>
	 
</p>

<p>
	 
</p>
]]></description><guid isPermaLink="false">26504</guid><pubDate>Mon, 12 Jun 2023 14:18:00 +0000</pubDate></item><item><title>Controller Issue</title><link>https://forum.nhl94.com/index.php?/topic/26309-controller-issue/</link><description><![CDATA[<p>
	I am using a USB adapter for a SNS-005 controller.
</p>

<p>
	 
</p>

<p>
	When I load up a rom, it seems to acknowledge the controller just fine. But once I make a selection and move to a submenu of any kind, the A-B-X-Y-L-R buttons all stop functioning. Sometimes only the A button will function instead of none of them, but then it acts like the B button.
</p>

<p>
	This is my first time trying to use retroarch, so I'm sure I'm just screwing something up.
</p>

<p>
	 
</p>

<p>
	Any ideas?
</p>
]]></description><guid isPermaLink="false">26309</guid><pubDate>Mon, 08 May 2023 18:29:40 +0000</pubDate></item><item><title>RetroArch Tips and Troubleshooting</title><link>https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/</link><description><![CDATA[
<p>
	<span style="font-size:16px;"><strong>"Tips and Troubleshooting" Cheat Sheet</strong></span><br><br>
	These are some issues and some fixes for RetroArch.  The fixes and more details are in the messages below.<br><br><strong>TROUBLESHOOTING</strong>
</p>

<ol>
<li>
		<a href="https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/&amp;do=findComment&amp;comment=175551" rel="">No Audio Issue</a> 
	</li>
	<li>
		<a href="https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/&amp;do=findComment&amp;comment=175552" rel="">Win10 Jumpy Video</a> <span style="background-color:#66ff66;"> see Issue 8</span>
	</li>
	<li>
		<a href="https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/&amp;do=findComment&amp;comment=175553" rel="">SNES "Multitap" Netplay</a> Issue
	</li>
	<li>
		<a href="https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/&amp;do=findComment&amp;comment=175554" rel="">Mac Fullscreen/Hotkey</a> Issues  <span style="background-color:#66ff66;"> fixed in 1.7.9+ </span>
	</li>
	<li>
		<a href="https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/&amp;do=findComment&amp;comment=175561" rel="">"Slow Motion" Video</a>
	</li>
	<li>
		<a href="https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/&amp;do=findComment&amp;comment=175702" rel="">"Black Flicker"</a> Issue <span style="background-color:#66ff66;"> fixed in 1.7.9+</span>
	</li>
	<li>
		<span style="background-color:#66ff66;">No longer a problem with 1.7.9+</span>
	</li>
	<li>
		<a href="https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/&amp;do=findComment&amp;comment=178379" rel="">Audio/Video Stuttering and Poor Framerates</a>
	</li>
</ol>
<p>
	<span style="background-color:#ffff00;"> Please share your short tips and tweaks in the thread below! </span>  We want to cover as many situations as possible, and build this Cheat Sheet.<br><br><br><strong>TIPS</strong>
</p>

<p>
	A. <a href="https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/&amp;do=findComment&amp;comment=175703" rel="">Use Direct Connection (instead of Relay) if Possible</a><br>
	B. <a href="https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/&amp;do=findComment&amp;comment=175704" rel="">Hot Swapping Home and Away with "i" Keyboard Shortcut</a><br>
	C. <a href="https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/&amp;do=findComment&amp;comment=175706" rel="">Hotkeys (Keyboard Shortcuts)</a>
</p>

<p>
	 
</p>
]]></description><guid isPermaLink="false">18699</guid><pubDate>Wed, 05 Dec 2018 04:15:54 +0000</pubDate></item><item><title>Retroarch not working</title><link>https://forum.nhl94.com/index.php?/topic/25727-retroarch-not-working/</link><description><![CDATA[<p>
	Hi guys my retroarch isn't working it just goes to black screen then comes back to the main screen.  Now I deleted the config.cfg file that ppl said to do if this happens but it still wouldn't start.  And even though I didn't delete retroarch I went to I think it was from file manager and downloaded it again.  Still wouldn't work.
</p>

<p>
	 
</p>

<p>
	Any ideas what might be up?
</p>
]]></description><guid isPermaLink="false">25727</guid><pubDate>Tue, 10 Jan 2023 03:40:29 +0000</pubDate></item><item><title>HOW TO: Set up Direct Connection for Netplay</title><link>https://forum.nhl94.com/index.php?/topic/19480-how-to-set-up-direct-connection-for-netplay/</link><description><![CDATA[<p>
	With the upcoming season of Classic, I would like everyone to use Direct Connect for netplay. As of this date (10/14/2019), relay server is not working.
</p>

<p>
	This is actually very simple to set up. Just requires a few minutes of work, and more time to find the instructions for your router/modem.
</p>

<p>
	Check out this video from therexershow - <a href="https://www.youtube.com/watch?v=g95jKjlmOGw" rel="external nofollow">RetroArch - How to Set up Port Forwarding</a>
</p>

<p>
	 
</p>

<p style="text-align: center;">
	<u><font size="5"><b>Introduction</b></font></u>
</p>

<p>
	When playing a game against someone via netplay (P2P - Peer to Peer), one player acts as the host (or server), and the other acts as the client. The host creates the game, and the client connects to the host. In order for a connection to be made, the host needs to allow some kind of access to the client. This is where something called a "Network Port" is used. By opening a specific port, the host allows the client a direct connection to their computer. Now, it is important to note that the port is ONLY OPEN when it needs to be, and is opened and closed by the emulator. 
</p>

<p>
	For instance, Player 1 hosts a game. They turn on netplay hosting. They start the ROM. At this point, the emulator opens a specific port (designated by the emulator). The client then connects via the network port, and has a direct connection with the host. The game begins, and everyone has fun. 
</p>

<p>
	This situation sounds very simple, and it is. Where it gets complicated, is when there are multiple devices that the communication has to pass through, like a modem, router, switch, etc. Then, on top of that, everything has its own firewall, limiting unwanted and wanted connections from the internet. This is where port forwarding and uPnP come in to help streamline the communication.
</p>

<p>
	 
</p>

<p>
	Just for clarity, all the stuff on the host's side of things affects if the communication can be established. The emulator on the host's side just puts up a message, saying "Hey, anyone want to play", where the client's side says "I want to play with you, specifically". Since the host does not know the specific client who is connecting to them, it's security features (router, Windows firewall, etc) will prevent the connection. Therefore, the security stuff on the host's side is the one that has to provide the exception to allow the connection (i.e. port forwarding or uPnP).
</p>

<p>
	So, if you plan on hosting netplay games, you need to set this up.
</p>

<p>
	 
</p>

<p>
	<strong>IP Address</strong> <strong>-</strong> The network address assigned to your network card in your computer. Note, you will have 2 separate IP address for WiFi and Ethernet, because they are 2 separate "cards". When you are connected to a router, your router will assign a "local" IP address to your computer and other devices. These usually start with 192.168.x.x, or 10.10.x.x. Your ISP (Internet Service Provider) assigns your router an IP address, which is used by the internet. If you type in "What's my IP" in google, it will show you your router's IP address.
</p>

<p>
	 Those people who don't have a router, and just have their computer connected directly to their modem, don't have a local IP address. The IP address assigned by their ISP is given to the computer. Note, your "modem" might actually be a modem/router combo (check and see if it has an antenna and multiple ethernet ports on the back of it), and in that case, works like a router (see above paragraph). 
</p>

<p>
	<strong>uPnP (Universal Plug-n-Play) -</strong> A feature in some routers that allows a workaround to port forwarding. It kind of lets the program choose a port, and configures port forwarding on the fly. Many new routers (2010+ I'd say) have this feature, and it is most likely disabled by default. This is the easiest solution.
</p>

<p>
	<strong>DHCP Reservation - </strong>Reserves the local IP address for your computer on your router. This keeps the IP address of your computer from changing, and is important to set, because we use a local IP address when setting up Port Forwarding.
</p>

<p>
	<strong>Port Forwarding - </strong>This is an exception to the security features of your router. We allow a local IP address (your computer in this case, set with DHCP Reservation, so it never changes), the ability to open and close a port through the router firewall. This allows the client's communication to pass through, and directs it (or forwards it) to the correct local IP address.   
</p>

<p>
	 
</p>

<p>
	To do either uPnP or Port Forwarding, it will be very helpful to download your router's instruction manual. Most manuals will have sections instructing how to log in to your router, set up uPnP, DHCP Reservation (might also be  called IP reservation), and Port Forwarding. If not, you should be able to find instructions pretty easily on the internet via search engine.
</p>

<p>
	 
</p>

<p style="text-align: center;">
	<strong><u><span style="font-size:24px;">uPnP Setup</span></u></strong>
</p>

<p>
	uPnP or NAT Traversal, is the easiest way to set up direct connect. But, you need a router that supports uPnP. The easiest way to check is to do a google search of your router model with uPnP. If you can find your router instruction manual, this would be perfect. 
</p>

<p>
	 
</p>

<p>
	<span style="font-size:16px;"><strong>Step 1: Log in to router</strong></span>
</p>

<p>
	<b>-</b> Look up instructions online how to login to your router. Go to a web browser, and type in your router's gateway IP address (usually 192.168.0.1, or 192.168.1.0, it will say it in the instructions). You will be asked for a user name and password, enter those (again refer to instructions, they should be a default, something like "admin" and "password"). Note, the only computer who can login to your router, are those that are connected to it (outside people cannot login to the router).
</p>

<p>
	<span style="font-size:16px;"><strong>Step 2: Turn on uPnP</strong></span>
</p>

<p>
	<span style="font-size:16px;">- </span>Refer to the instructions on how to turn on uPnP. If there are any other uPnP settings, just ignore them. The default values will work fine.
</p>

<p>
	<span style="font-size:16px;"><strong>Step 3: Turn on NAT Traversal in RetroArch</strong></span>
</p>

<p>
	<span style="font-size:16px;">- </span>This setting should be turned on by default if you have downloaded the package from nhl94online.com as of 10/14/2019.
</p>

<p>
	- To check if its turned on (or if you need to turn it on):
</p>

<ol><li>
		Open RetroArch
	</li>
	<li>
		Go to Settings-User Interface. Turn "Show Advanced Settings" to ON.
	</li>
	<li>
		Go to Settings-Network. Turn "Netplay NAT Traversal" to ON.
	</li>
	<li>
		Go back to Settings-User Interface. Turn "Show Advanced Settings" to OFF.
	</li>
	<li>
		Close RetroArch (to save the configuration if needed).
	</li>
	<li>
		Restart and play!
	</li>
</ol><p>
	- Note: This only needs to be done once. Once it is turned on, the setting does not have to be touched again. If you have Port Forwarding set up, it will use Port Forwarding before it tries uPnP.
</p>

<p>
	- Note: You may see a "Port Mapping Failed" error when hosting a game when this setting is ON. This indicates if uPnP is working. If you plan on trying your uPnP connection with your router, you want to see a message that says "Port Mapping Successful". If turning on uPnP, you still get the "Port Mapping Failed" message, you will still need to go through the port forwarding procedure.
</p>

<p>
	 
</p>

<p style="text-align: center;">
	 <strong><u><span style="font-size:24px;">Port Forwarding Setup</span></u></strong>
</p>

<p style="text-align: center;">
	 
</p>

<p style="text-align: center;">
	<span style="font-size:18px;"><strong>Part 1 - DHCP Reservation </strong></span>
</p>

<p>
	<span style="font-size:16px;"><strong>Step 1: Find your computer's current IP address</strong></span>
</p>

<p>
	- This may or may not be needed, depending on your router. But it's quick and easy to do.
</p>

<p>
	- For Windows PC:
</p>

<ol><li>
		Hit the Windows key and R key at the same time to bring up a "Run" window. At the prompt, type "cmd" (no quotes). A command prompt window will open up.
	</li>
	<li>
		Type "ipconfig" (no quotes) at the command prompt. You should see a window similar to this: <img alt="IP-PC.png" class="ipsImage ipsImage_thumbnailed" data-fileid="11400" data-ratio="49.75" data-unique="q686qn3z9" style="width: 400px; height: auto;" width="596" src="https://forum.nhl94.com/uploads/monthly_2019_10/IP-PC.png.5391bf896148dd21a55888cb1447f05a.png">  
	</li>
	<li>
		Write down the "IPv4 Address" of your Ethernet Adapter (might also say "Local Area Connection"). In the above screenshot, this is 192.168.1.184.
	</li>
</ol><p>
	- For Mac:
</p>

<ol><li>
		Go to the Apple logo on the top menubar, then choose "System Preferences". A new window will open up, and inside that window click on "Network".
	</li>
	<li>
		In the Network window, select Ethernet from the left side. Your Mac's IP address will be displayed on the right side as "IP Address".  <img alt="IP-Mac.png" class="ipsImage ipsImage_thumbnailed" data-fileid="11402" data-ratio="83.75" data-unique="bur9lss14" style="width: 400px; height: auto;" width="656" src="https://forum.nhl94.com/uploads/monthly_2019_10/IP-Mac.png.a333e87dd6f10df1bf1ceb4c8cb08a66.png"></li>
</ol><p>
	<span style="font-size:16px;">  </span>
</p>

<p>
	<span style="font-size:16px;"><strong>Step 2: Log in to your router</strong></span>
</p>

<p>
	- Look up instructions online how to login to your router. Go to a web browser, and type in your router's gateway IP address (usually 192.168.0.1, or 192.168.1.0, it will say it in the instructions). You will be asked for a user name and password, enter those (again refer to instructions, they should be a default, something like "admin" and "password"). Note, the only computer who can login to your router, are those that are connected to it (outside people cannot login to the router).
</p>

<p>
	 
</p>

<p>
	<span style="font-size:16px;"><strong>Step 3: Find the DHCP Reservation page and set it up</strong></span>
</p>

<p>
	- Look up this information on the internet, or in your router's instruction manual. This is usually located in the "LAN" section of your router's home screen. I attached a screenshot of an example.
</p>

<p>
	<a class="ipsAttachLink ipsAttachLink_image" data-fileext="png" data-fileid="11403" href="https://forum.nhl94.com/uploads/monthly_2019_10/Netgear-Home.png.b9d4f690fcba4acea89ba12ca8e4f49c.png" rel=""><img alt="Netgear-Home.png" class="ipsImage ipsImage_thumbnailed" data-fileid="11403" data-ratio="87.00" data-unique="1f3f33o7i" style="width: 500px; height: auto;" width="862" src="https://forum.nhl94.com/uploads/monthly_2019_10/Netgear-Home.thumb.png.f5dfa8a80607d96d672c18fd995c1d47.png"></a>
</p>

<p>
	- When we open up the LAN section, we see the following page. You'll see a section referred to as "Reserved IP Table", usually called something similar to DHCP Reservation. You will see some entries already here in the screenshot, but most likely on your router, it will be blank. Click the Add button. (Also, note at the top of this screen, this router supports uPnP).      
</p>

<p>
	<a class="ipsAttachLink ipsAttachLink_image ipsAttachLink_left" data-fileext="png" data-fileid="11404" href="https://forum.nhl94.com/uploads/monthly_2019_10/Netgear-LAN.png.3bd7dabc08cf9f9fe3ca66a79e748918.png" rel="" style="float: left;"><img alt="Netgear-LAN.png" class="ipsImage ipsImage_thumbnailed" data-fileid="11404" data-ratio="77.60" data-unique="wl88gx86q" style="width: 500px; height: auto;" width="967" src="https://forum.nhl94.com/uploads/monthly_2019_10/Netgear-LAN.thumb.png.1d98d9a38c47e0e1e3cc9d553b6e625b.png"></a>
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	- On the Add screen, it asks us to enter the IP address, MAC address (physical address of network card), and a Device Name. If you need to get the MAC address, we can go to "Attached Devices" (black arrow) and get the MAC address of the network card by looking for the IP Address on the list. On many routers, there may be a drop-down where you can select from connected devices. In this case, you can just choose your computer from the list, comparing IP address of the list to the one you wrote down in Step 1. Once done hit Apply. If you go back to the LAN page, you should now see your entry in the Reserved area.
</p>

<p>
	<a class="ipsAttachLink ipsAttachLink_image" data-fileext="png" data-fileid="11405" href="https://forum.nhl94.com/uploads/monthly_2019_10/Netgear-Add.png.99e8ab4aa7b5a3e919528d6da68e82be.png" rel=""><img alt="Netgear-Add.png" class="ipsImage ipsImage_thumbnailed" data-fileid="11405" data-ratio="82.60" data-unique="t33959vxn" style="width: 500px; height: auto;" width="908" src="https://forum.nhl94.com/uploads/monthly_2019_10/Netgear-Add.thumb.png.f41060570ff81fe0cb6f6fe2b2120c5e.png"></a>
</p>

<p>
	 
</p>

<p>
	- Now, you have reserved your IP Address for your computer. This insures that whenever your computer is restarted, or whenever your router decides to change up the IP Addresses, the one set for your computer will not change. Now we can move on to Port Forwarding.
</p>

<p>
	 
</p>

<p style="text-align: center;">
	<span style="font-size:18px;"><strong>Part 2 - Port Forwarding</strong></span>
</p>

<p>
	<span style="font-size:18px;"><strong>  </strong></span><span style="font-size:16px;"><strong>Step 1: Log in to your router</strong></span>
</p>

<p>
	<strong>- </strong>If you closed out your router screen from the previous part, log back in.
</p>

<p>
	<span style="font-size:18px;"><strong>  </strong></span><span style="font-size:16px;"><strong>Step 2: Find the Port Forwarding page and set it up</strong></span>
</p>

<p>
	<strong>- </strong>Look for your router's instructions on port forwarding. If you can't find them, it's no big deal. The page is usually located in the Advanced section or Firewall/Security section of a router. In this example, the following screen will show:
</p>

<p>
	<a class="ipsAttachLink ipsAttachLink_image" data-fileext="png" data-fileid="11407" href="https://forum.nhl94.com/uploads/monthly_2019_10/Alternate-Ports.png.b2353edc3a1f9d10cdab0316adb479bf.png" rel=""><img alt="Alternate-Ports.png" class="ipsImage ipsImage_thumbnailed" data-fileid="11407" data-ratio="38.60" data-unique="gz6glwd9u" style="width: 500px; height: auto;" width="1000" src="https://forum.nhl94.com/uploads/monthly_2019_10/Alternate-Ports.thumb.png.553f012a616d2f15f13917e4e4549f5e.png"></a>
</p>

<p>
	          - For Service Name, enter RetroArch (this doesn't matter, its just to identify it for you).
</p>

<p>
	          - For Protocol, choose TCP. This could either be TCP or TCP/UDP. But you should not set it to UDP only. This may also be called "Service Type".
</p>

<p>
	          - For External Starting Port, put "55435". This is the port that is used for RetroArch netplay.
</p>

<p>
	          - For External Ending Port, I also put "55435". (This is used if you were to open a range of ports, but since we are only using 1 port, we put the same number in both spots).
</p>

<p>
	         - You'll also notice the "Use the same port range for Internal port". If your router doesn't have this, but has Internal Starting and Ending Ports, set them both to 55435.
</p>

<p>
	         - Rule of thumb, anywhere it says "Port", set to 55435.
</p>

<p>
	         - For Internal IP address, you would enter the IP address of your computer. This is the address we set to reserve in Part 1: DHCP Reservation
</p>

<p>
	          - After I'm done, I click Apply.
</p>

<p>
	- Note: This is a typical Port Forwarding page, but not all will look like this. There may be less things to enter, or more. Point being, any port should be set to 55435, service to TCP or TCP/UDP, and Internal IP address set to your computer's IP address. If there is an entry for External IP address, this should be set to all 0s.
</p>

<p>
	 
</p>

<p style="text-align: center;">
	 
</p>

<p style="text-align: center;">
	<u><font size="5"><b>Testing</b></font></u>
</p>

<p>
	<strong>NOTE: Windows Firewall needs to either be disabled, or allow RetroArch to pass through. When you host for the first time, a Windows Firewall message should pop up, asking if the program should be allowed to pass through. I usually check both boxes for Private and Public networks, then hit the OK button. If you hit Cancel on this message, please look up online how to allow a program to pass through the Firewall.</strong>
</p>

<p>
	 
</p>

<p>
	If you set up with uPnP, the easiest way to test is hosting a game and having someone connect to you. There is no easier way to test this setup.
</p>

<p>
	 
</p>

<p>
	If you set up Port Forwarding with DHCP Reservation, you should be able to test your setup. This can be done without another person. We can use a website like <a href="https://www.canyouseeme.org" rel="external nofollow">canyouseeme.org</a> to test if RetroArch can open the port successfully. There are a few steps in testing this:
</p>

<ol><li>
		Open RetroArch, and Start Netplay host (under Main Menu-Netplay). You can also load the ROM first, and hit the "n" key to toggle netplay host.
	</li>
	<li>
		Open a ROM. When the ROM opens, you should see a message similar to "Waiting for client..."
	</li>
	<li>
		Go to <a href="https://www.canyouseeme.org/" ipsnoembed="true" rel="external nofollow">https://www.canyouseeme.org/</a>. Enter 55435 as the port and hit the "Check Port" button.
	</li>
	<li>
		If successful, you should see a message similar to below: 
	</li>
</ol><p>
	<img alt="canyouseeme.png" class="ipsImage ipsImage_thumbnailed" data-fileid="11408" data-ratio="61.47" data-unique="etzwu2hg8" width="462" src="https://forum.nhl94.com/uploads/monthly_2019_10/canyouseeme.png.e3463fb37448ccd9ea735c5b7f8ec480.png"></p>

<p>
	 If you see a message that says it is blocking the port, or a timeout, double check your computer's IP address hasn't changed, and that the port forward IP address is the same as your computers.
</p>

<p>
	NOTE: The IP address you see on canyouseeme.org is your router's IP address from your ISP, so don't get those confused.
</p>

<p>
	 
</p>

<p>
	<strong>UPDATE: </strong>I attached a program to this post called Simple Port Tester (for Windows only). This is an alternative to the testing procedure above. Instead of hosting a game, then using canyouseeme.org to see if the port is open, you can use this program. Install it, then open it. Type in the port to test, and the program will open the port itself, then try and see if it is open by using a site similar to canyouseeme.org. This is a lot easier, since you don't have to have RetroArch running when testing in this case. It is also a better test, as it can tell you if it's a Windows Firewall issue, or a port opening issue on your router.
</p>

<p>
	<strong>EDIT:</strong> From RetroArch 1.8.8 package and on, the Simple Port Tester is included in the package, in the "Simple Port Tester" located in your RetroArch folder.
</p>

<p>
	If you have any questions, please feel free to DM me in Discord (chaos).
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	<a class="ipsAttachLink" data-fileext="exe" data-fileid="11428" href="https://forum.nhl94.com/applications/core/interface/file/attachment.php?id=11428" rel="">simple_port_tester_setup.exe</a>
</p>]]></description><guid isPermaLink="false">19480</guid><pubDate>Tue, 15 Oct 2019 01:42:43 +0000</pubDate></item><item><title>RetroArch 1.10 update</title><link>https://forum.nhl94.com/index.php?/topic/21908-retroarch-110-update/</link><description><![CDATA[<p>
	Starting with playoffs in the leagues coming up (as of 2/14/22), I would like everyone to start using the RA 1.10 package. This can be downloaded from the nhl94online.com front page as of today.
</p>

<p>
	To update, download the package, then set your name in Settings-User, restart RA. Copy over your ROMs folder from 1.8.8 to the RA 1.10 folder, and choose "Replace" if asked. 
</p>

<p>
	<strong>DO NOT copy over your retroarch.cfg file from 1.8.8! </strong>There are a lot of changes made between config files from 1.8.8 and 1.10.
</p>

<p>
	 
</p>

<p>
	<font size="4"><b><u>Improvements</u></b></font>
</p>

<ul><li>
		<u>Controllers</u> - 1.10 should have less fussing with controller binds. It should recognize more controllers out of the box, without the need to manually configure. There were bugs in 1.8.8 for some of the controller config stuff.
	</li>
	<li>
		<u>Relay Server</u> - The relay server is back, for those of you who can't host, or if there is framerate drops when you host. The relay server code is re-built from the ground up, and I believe (?) should be a smoother experience than it was in the past. Also, we have the ability to set up a custom relay server, which we can use for the 94 community only. This will be looked at in the future.
	</li>
	<li>
		<u>Netplay Room List Cleanup</u> - Rooms that are not joinable will be removed from the list, so it should be easier to find the person you are looking to connect to
	</li>
	<li>
		<u>Netplay Code Revamped</u> - I'm not guaranteeing that you will have a better experience, but a lot of things have been streamlined when it comes to netplay. For example, the host's latency settings will be used for the game (before you had to make sure the host and the person joining had the same settings).
	</li>
	<li>
		<u>Some changes I made</u> - RA will now open in fullscreen by default. I removed some of the menu categories to make it less confusing. 
	</li>
	<li>
		Tons of bug fixes; it's been 2 years since we updated!
	</li>
	<li>
		<u>Switched to the 64-bit version on Windows</u> - We had been using the 32-bit version since we started 4 years ago using RA. Which limits the amount of RAM that can be used to 4GB. At this point, everyone should have a 64-bit CPU, if your PC was made in the last 10 years. 
	</li>
</ul><p>
	<span style="font-size:18px;"><strong><u>New Features</u></strong></span>
</p>

<p style="text-align: center;">
	<span style="font-size:16px;"><strong>Host Settings</strong></span>
</p>

<p style="text-align: center;">
	 <img alt="Host window.PNG" class="ipsImage ipsImage_thumbnailed" data-fileid="22473" data-ratio="75.31" data-unique="qtm2kbcc7" style="width: 640px; height: auto;" width="962" src="https://forum.nhl94.com/uploads/monthly_2022_02/1606279321_Hostwindow.PNG.7a3f8ab080fa9b439f9141e19defb43f.PNG"></p>

<p>
	There's a few new settings when it comes to hosting.
</p>

<p>
	<strong>"Max Simultaneous Connections"</strong> - limits how many people can connect to you. I have this default to 2 right now (2 people can connect, like a person playing and a streamer). Change this when you want more people to connect to you (like for 2v2, set it to 3). This only affects when you are hosting.
</p>

<p>
	<strong>"Ping Limiter"</strong> - Now when someone connects to your host, it will display their ping on connection. This value will limit that ping (it's in ms). So if it is set to 200, and someone tries connecting to you that has a ping of 240, it won't let them connect. I changed this value to 250 in the final config file. You can change this whenever you wish. It only affects when you are hosting.
</p>

<p>
	<strong>"Use Relay Server" </strong>- Turn this on when you have problems hosting a game. This will use the relay server to set up the host. 
</p>

<p>
	 
</p>

<p style="text-align: center;">
	<strong><span style="font-size:16px;">Ping Display</span></strong>
</p>

<p style="text-align: center;">
	<a class="ipsAttachLink ipsAttachLink_image" href="https://forum.nhl94.com/uploads/monthly_2022_02/ping.PNG.46e13a65947e91a13da046bd0a08ebc9.PNG" data-fileid="22472" data-fileext="PNG" rel=""><img class="ipsImage ipsImage_thumbnailed" data-fileid="22472" data-ratio="62.10" data-unique="ft9c9twhj" width="1000" alt="ping.PNG" src="https://forum.nhl94.com/uploads/monthly_2022_02/ping.thumb.PNG.a2941cde2e296ef0862a02bf53c48f17.PNG"></a>
</p>

<p>
	For those of you who are clients (you are connecting to a host), you will see your ping to the host in the bottom right corner of the RA window. This gives you a decent idea on how well the network connection is. The host will only see the ping during the moment the client connects to them, in a notification window.
</p>

<p>
	 
</p>

<p style="text-align: center;">
	<span style="font-size:16px;"><strong>Chat</strong></span> 
</p>

<p style="text-align: center;">
	<a class="ipsAttachLink ipsAttachLink_image" href="https://forum.nhl94.com/uploads/monthly_2022_02/chat.PNG.f7707c45acf963d307add3be27a190c7.PNG" data-fileid="22474" data-fileext="PNG" rel=""><img class="ipsImage ipsImage_thumbnailed" data-fileid="22474" data-ratio="60.60" data-unique="0v07djwjh" width="1000" alt="chat.PNG" src="https://forum.nhl94.com/uploads/monthly_2022_02/chat.thumb.PNG.7533da23a429d8a7852f155d18dc0e77.PNG"></a>
</p>

<p>
	RA has finally added an in-game chat. To chat with your opponent, or whoever is connected to you, hit the Tab key on your keyboard. This will open up the on-screen keyboard window (like when you enter a netplay password). You can type using your keyboard (or if you wish to click on the on-screen keyboard with a mouse), hit Enter, and the message will show in the bottom left of the screen. It will fade away after a little bit. This is more useful than you would think; instead of having to chat in Discord, you can use the in-game chat now.
</p>

<p>
	 
</p>

<p>
	 
</p>
]]></description><guid isPermaLink="false">21908</guid><pubDate>Mon, 14 Feb 2022 18:34:39 +0000</pubDate></item><item><title>Sweet 16 Tourney - Coach K / NBA JAM TE</title><link>https://forum.nhl94.com/index.php?/topic/22119-sweet-16-tourney-coach-k-nba-jam-te/</link><description><![CDATA[<p>
	Not sure how many of you would enjoy a Coach K / NBA JAM TE sega tourney. If you do, come join us on DISCORD.
</p>

<p>
	<a href="https://discord.gg/7cRHvrfp" ipsnoembed="true" rel="external nofollow">https://discord.gg/7cRHvrfp</a>
</p>
]]></description><guid isPermaLink="false">22119</guid><pubDate>Wed, 23 Mar 2022 19:31:23 +0000</pubDate></item><item><title>Retroarch: New Cores (Mar'22)</title><link>https://forum.nhl94.com/index.php?/topic/22079-retroarch-new-cores-mar22/</link><description><![CDATA[<p>
	Attached here are the new modified cores to allow netplay between a Mac and a PC. Nothing else is changed in the core, so they should work just like the old ones, but with this added function. There is a separate PC and Mac core.
</p>

<p>
	Follow the instructions below:
</p>

<p>
	 
</p>

<p>
	For PC: Download: <a class="ipsAttachLink" data-fileid="23731" href="https://forum.nhl94.com/applications/core/interface/file/attachment.php?id=23731&amp;key=bf967eb687f7f5138d29df93654bc8eb" data-fileext="dll" rel="">genesis_plus_gx_libretro.dll</a>. Copy this file into your RetroArch-1.10-Win64/cores folder, and choose "Replace" when asked. No other change is needed.
</p>

<p>
	 
</p>

<p>
	For Mac: Download: <a class="ipsAttachLink" data-fileid="23730" href="https://forum.nhl94.com/applications/core/interface/file/attachment.php?id=23730&amp;key=efa0d827668ef4df002aa1416badbd55" data-fileext="dylib" rel="">genesis_plus_gx_libretro.dylib</a>. Open a Finder window, navigate to your Documents folder, open the RetroArch folder, then the cores folder, and copy this file into there. Choose "Replace" when asked. No other change is needed.
</p>

<p>
	 
</p>

<p>
	I will update the packages on nhl94online.com tomorrow with the new core (3/16/22). Also please check the pinned messages in the help channel and turn off the "Pause Content" settings as described in the pinned post. Check before you play someone to make sure you both have the new core.
</p>
]]></description><guid isPermaLink="false">22079</guid><pubDate>Fri, 18 Mar 2022 03:49:19 +0000</pubDate></item><item><title>Weird RA Pause during play</title><link>https://forum.nhl94.com/index.php?/topic/20401-weird-ra-pause-during-play/</link><description><![CDATA[<p>
	Hi there,
</p>

<p>
	I use a fat GENs 3 button with a RetroUSB adapter.  I notice that sometimes, albeit rarely, I get this weird glitch:<br><br>
	1. I am going to one time it<br>
	2. just before the one time happens, but after I have pressed the C button, it pauses<br><br>
	And when I say pauses, I mean RA suddenly shows the menu, and the game is totally halted.  Then I have to navigate to "Resume Game" and all flow  is lost.  (And I when I resume, I am too sheepish to do anything but dump the puck, if I can, but sometimes the already registered one timer goes through, creating anger and confusion from my opponent, lol.)<br><br>
	Does anyone else experience this? <br><br>
	It is rare. Probably 1x per 10 or so games.<br><br>
	I think when I am mashing buttons, some weird combo (like D-pad down, B and C at same time, for a split second) short circuits RA and it thinks I have used a keyboard shortcut.  On this note, there is 0% chance I am hitting my keyboard.  It is on a chair 2 feet away when I play.<br><br>
	Thoughts?
</p>

<p>
	 
</p>]]></description><guid isPermaLink="false">20401</guid><pubDate>Wed, 30 Dec 2020 04:28:02 +0000</pubDate></item><item><title>HOW TO: Create a Save State in RetroArch</title><link>https://forum.nhl94.com/index.php?/topic/18493-how-to-create-a-save-state-in-retroarch/</link><description><![CDATA[<p style="text-align: center;">
	<span style="font-size:28px;"><u><strong>Creating a Save State in RetroArch</strong></u></span>
</p>

<p>
	 
</p>

<p>
	<strong><span style="font-size:18px;">This process will be the same for both Genesis and SNES.</span></strong>
</p>

<p>
	<span style="font-size:16px;">Before your first time playing online against an opponent, please make sure the following settings have been set:</span>
</p>

<p>
	<span style="font-size:16px;">Under Settings-&gt;Saving, set Save State Auto Index to ON. This will eliminate the need to increment save states after each game, and prevent overwriting of saves (very useful!!). Note: This should already be set if you used the files from nhl94online.com.</span>
</p>

<p>
	 
</p>

<p style="text-align: center;">
	<img alt="Auto Index.png" class="ipsImage ipsImage_thumbnailed" data-fileid="9339" data-unique="2ypoifmnb" style="width: 640px; height: auto;" src="https://forum.nhl94.com/uploads/monthly_2018_06/185086890_AutoIndex.png.f849bdfbdefe1103b356767d45558f36.png"></p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	<span style="font-size:20px;"><strong>Check your default save state directory - </strong></span><span style="font-size:16px;">Make sure you know where the saves will be stored. This can be changed and set to whatever you'd like. The default path is "RetroArch\states". So, if you installed RetroArch on the Desktop, they will be found in "Desktop\Retroarch-1.10-Win64\states". On Mac, they will be located in your Documents\RetroArch\states folder.</span>
</p>

<p>
	<span style="font-size:16px;">If you would like to change the path, go to Settings-&gt;Directory, and change the path for "Savestates" to whatever your heart desires.</span>
</p>

<p>
	 
</p>

<p>
	<strong><span style="font-size: 20px;">Play the game, save on the 3-Stars screen, or the Final Summary Screen - </span></strong>
</p>

<p>
	<span style="font-size:16px;"><strong>The Default button to save a state is F5. F7 will increment (not needed if Save State Auto Index is set as above), F6 will decrement.</strong></span>
</p>

<p>
	<font size="3">Once the 3-Stars screen pops up at the end of the game, hit the </font><strong style="font-size: 16px;">F5</strong><font size="3"> button to save the state. You will see a message in the bottom left corner telling you the state was saved, and the slot number it was saved to. The save can also be made at the Final Summary Screen (where the Exit Game option is seen, along with the Scoreboard). If you do decide to save at the Final Summary Screen, just make sure a "game highlight" is not playing!!</font>
</p>

<p>
	 
</p>

<p>
	 
</p>

<p style="text-align: center;">
	<a class="ipsAttachLink ipsAttachLink_image" data-fileext="png" data-fileid="9340" href="https://forum.nhl94.com/uploads/monthly_2018_06/2104916197_SaveState.png.ce5ae9312eb50cd41f5a253198e09d06.png" rel=""><img alt="Save State.png" class="ipsImage ipsImage_thumbnailed" data-fileid="9340" data-unique="fzjpgd55y" style="width: 640px; height: auto;" src="https://forum.nhl94.com/uploads/monthly_2018_06/482225652_SaveState.thumb.png.673502290498f9251dbcf669db1f5251.png"></a>
</p>

<p>
	 
</p>

<p>
	<span style="font-size:16px;">Once the game is saved, you can navigate to your Save State folder and upload the game to the nhl94online.com site.</span>
</p>
]]></description><guid isPermaLink="false">18493</guid><pubDate>Thu, 21 Jun 2018 02:57:04 +0000</pubDate></item><item><title>Best emulator and settings in Retroarch (Mega Drive / Genesis)</title><link>https://forum.nhl94.com/index.php?/topic/19900-best-emulator-and-settings-in-retroarch-mega-drive-genesis/</link><description><![CDATA[<p>
	Sorry if this is already dealt with elsewhere on the board.  If so, feel free to point me in the right direction!
</p>

<p>
	I recently bought (and hacked) a Mega Drive / Genesis Mini and, along with everyone else that owns one, have loaded with it maybe 1,000 old school games across the Sega, Nintendo &amp; TurboGrafx systems up to now.  Neo Geo and others to follow.
</p>

<p>
	Anyway, I have (obviously) NHL '94 and pretty much every other hockey game on the older systems loaded up.
</p>

<p>
	I prefer the MD / Genesis version of the game and am using Genesis Plux GX (v.1.7.4) as my emulator.  However, the game seems to run a <strong>little</strong> fast compared to the original game (which is actually plugged into an actual MD at the side of the Mini as I type).  Other than the controls (I am using a Hori pad and, whilst I know it is cheating, have opted for analog controls up to now, although the same issue applies when using the d-pad), everything else in the emulator is stock, settings-wise.
</p>

<p>
	The "CPU Speed" setting is 100% and the region (in this case, NTSC-U) is correct.
</p>

<p>
	Is there a general consensus on what the best / most acccurate emulator is for NHL '94 on the MD?
</p>

<p>
	Cheers.
</p>]]></description><guid isPermaLink="false">19900</guid><pubDate>Sat, 27 Jun 2020 13:43:59 +0000</pubDate></item><item><title>RetroArch 2on2 Setup Guide</title><link>https://forum.nhl94.com/index.php?/topic/18758-retroarch-2on2-setup-guide/</link><description><![CDATA[<p>
	<span style="font-size:16px;"><span style="color:#c0392b;"><strong>EDIT 11/14/2020 - This has changed much since the original write-up was done. I updated it to RetroArch version 1.8.8. </strong></span></span>
</p>

<p>
	 
</p>

<p>
	This is a guide to setting up 4-way play on RetroArch. Useful for the 2on2 ROM.
</p>

<p>
	The 2on2 ROM for both Genesis and SNES are included with the RetroArch package that you can find on nhl94online.com.
</p>

<p>
	Please make sure you have loaded the ROM at least once before (Load Core-&gt;Genesis Plus GX or Snes9x, then Load Content-&gt;Start Directory-&gt;Genesis or Super Nintendo-&gt;2on2 ROM).
</p>

<p>
	<b>The person hosting should have direct connect set up. This will give the smoothest connection for everyone. This also allows you to swap teammates and reset the game if there is a crash while keeping everyone connected.</b>
</p>

<p>
	Both Genesis and SNES will be covered in this guide.
</p>

<p>
	 
</p>

<p>
	<u><span style="font-size:18px;"><strong><span style="color:#c0392b;">Step 1:</span></strong></span><span style="font-size:18px;"><strong><span style="color:#c0392b;"> Set Controls</span></strong></span></u>
</p>

<p>
	Load the 2on2 ROM. Once it is running, access the Quick Menu (by going to Command-&gt;Menu Toggle on the Menu Bar or pressing F1 key), and go down to "Controls", then select "Port 1 Controls".
</p>

<p>
	 
</p>

<p>
	<a class="ipsAttachLink ipsAttachLink_image" data-fileext="png" data-fileid="14716" href="https://forum.nhl94.com/uploads/monthly_2020_11/Controls.png.929a5de60eb339d39661fd3774fe6fec.png" rel=""><img alt="Controls.png" class="ipsImage ipsImage_thumbnailed" data-fileid="14716" data-ratio="74.83" data-unique="kenxfurtv" style="width: 600px; height: auto;" width="1000" src="https://forum.nhl94.com/uploads/monthly_2020_11/Controls.thumb.png.91ce27513373330d9002aae9ac4aae3e.png"></a>
</p>

<p>
	In the Controls window, change "Device Type", using the left and right arrow keys on your keyboard, to "MD Joypad 3 Button + 4-WayPlay" for Genesis, and leave it as "SNES Joypad" for SNES. Hit backspace, and choose "Port 2 Controls". Set "Device Type" to "MD Joypad 3 Button + 4-WayPlay" for Genesis, and set it to"Multitap" for SNES.
</p>

<p>
	<a class="ipsAttachLink ipsAttachLink_image" data-fileext="png" data-fileid="14717" href="https://forum.nhl94.com/uploads/monthly_2020_11/4-Way.png.35ded0437c127ad6e6985633b26dcb31.png" rel=""><img alt="4-Way.png" class="ipsImage ipsImage_thumbnailed" data-fileid="14717" data-ratio="76.00" data-unique="44t5ce6oh" style="width: 600px; height: auto;" width="999" src="https://forum.nhl94.com/uploads/monthly_2020_11/4-Way.thumb.png.3760c3f1a1d13c7081bf76af9358268a.png"></a>
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	<u><span style="font-size:18px;"><strong><span style="color:#c0392b;">Step 2<span>:</span></span></strong></span><span style="font-size:18px;"><strong><span style="color:#c0392b;"> Check 4 Player Setting</span></strong></span></u>
</p>

<p>
	Once done with Step 2, you will need to "Restart" the game (Quick Menu-&gt;Restart). For Genesis, goto the Game Setup screen and see if you can set the "Players" to "Four" <span>:</span>
</p>

<p>
	<img alt="Four.png" class="ipsImage ipsImage_thumbnailed" data-fileid="10682" data-unique="zek8esxfx" style="width: 600px; height: auto;" src="https://forum.nhl94.com/uploads/monthly_2019_02/Four.png.23a30f7d7b410b959a0aee2995f5bc4d.png"></p>

<p>
	 
</p>

<p>
	For SNES, choose your teams and settings, hit Start, and make sure there are 5 stars shown on the "Player Select" screen:
</p>

<p>
	<a class="ipsAttachLink ipsAttachLink_image" data-fileext="png" data-fileid="14718" href="https://forum.nhl94.com/uploads/monthly_2020_11/1325110046_5Stars.png.136a11f6d66534b1cb8889bcc2a598a9.png" rel=""><img alt="5 Stars.png" class="ipsImage ipsImage_thumbnailed" data-fileid="14718" data-ratio="74.17" data-unique="iaiwbza90" style="width: 600px; height: auto;" width="1000" src="https://forum.nhl94.com/uploads/monthly_2020_11/1240930333_5Stars.thumb.png.fd3de0a10aa2119bc5731e7b558de3ce.png"></a>
</p>

<p>
	If you are successful, move to Step 4. If not, recheck the Port Control settings.
</p>

<p>
	<u><span style="font-size:18px;"><strong><span style="color:#c0392b;">Step 4<span><span>:</span></span></span></strong></span><span style="font-size:18px;"><strong><span style="color:#c0392b;"> Save Game Remap File</span></strong></span></u>
</p>

<p>
	Once you are successful, you can save the Game Remap File, which will save the User Device Types specific to this game. This way you don't need to set it up every time, and you don't need to worry about changing it back when playing normal netplay.
</p>

<p>
	With the game still loaded (don't quit the game, or else the settings above will go back to default!), go to Quick Menu-&gt;Controls-&gt;Save Game Remap File". A message will pop up that the file has been saved.
</p>

<p>
	<a class="ipsAttachLink ipsAttachLink_image" data-fileext="png" data-fileid="14719" href="https://forum.nhl94.com/uploads/monthly_2020_11/Save.png.af543467fe41b3f9e6edab49f7010334.png" rel=""><img alt="Save.png" class="ipsImage ipsImage_thumbnailed" data-fileid="14719" data-ratio="74.33" data-unique="i2o0sdk8d" style="width: 600px; height: auto;" width="1000" src="https://forum.nhl94.com/uploads/monthly_2020_11/Save.thumb.png.2a034ffa3b2eae4cb0de664871c060ca.png"></a>
</p>

<p>
	 
</p>

<p>
	Now, when you load the 2on2 ROM, it will automatically load the Game Remap File (and your 4-WayPlay/Multitap setup)! This way, you will not have to redo this and undo it every time you decide to play. So, you only need to go through this setup once.
</p>

<p>
	 
</p>

<p>
	<u><span style="font-size:18px;"><strong><span style="color:#c0392b;">Step 5<span><span>:</span></span></span></strong></span><span style="font-size:18px;"><strong><span style="color:#c0392b;"> Start Netplay and Play</span></strong></span></u>
</p>

<p>
	<span style="color:null;">Start Netplay as you usually would (Main Menu-&gt;Netplay-&gt;Host-&gt;Start Netplay Host). This can be done before loading the ROM, or after (go to Quick Menu, go back a few times to the Main Menu). Then, once you hosting and the ROM is loaded, have the other players connect to you.</span>
</p>

<p>
	<span style="color:null;">In Genesis, Players 1 and 3 are the Home team, 2 and 4 are the Away team. To switch players, press the "i" key to "leave the game". Then the "i" key should be pressed in the order of players. (Example<span><span>:</span></span> If player 2 and 3 "leave the game", and Player 2 wants to be Player 3, Player 3 wants to be Player 2, Player 3 presses "i" key first, then Player 2 presses the "i" key. Now they are swapped.)</span>
</p>

<p>
	<a class="ipsAttachLink ipsAttachLink_image" href="https://forum.nhl94.com/uploads/monthly_2020_11/Users.png.6436896730f4524f48893ba39f714783.png" data-fileid="14715" data-fileext="png" rel=""><img alt="Users.png" class="ipsImage ipsImage_thumbnailed" data-fileid="14715" data-ratio="74.6" width="1000" src="https://forum.nhl94.com/uploads/monthly_2020_11/Users.thumb.png.a13969ac9e7edf64bb5cf8cf04f12268.png"></a>
</p>]]></description><guid isPermaLink="false">18758</guid><pubDate>Fri, 08 Feb 2019 23:04:19 +0000</pubDate></item><item><title>Port Forward seems slower?? WTF?!?!</title><link>https://forum.nhl94.com/index.php?/topic/19555-port-forward-seems-slower-wtf/</link><description><![CDATA[<p>
	Hi,<br>
	I recently had some extra time, and got port forwarding working.  But here is the thing: it seems slower to me!<br><br>
	Using Gens (or RA), there is a very consistent 'lag'. (But it is not erratic, or spikey.  It is consistent.  Feels like a small delay, in the milliseconds.  But it is throwing off my timing, and making things seem sort of "floaty"; like I am playing underwater.)<br><br>
	Anyone have any insights?<br><br>
	Here is my setup:<br>
	Win10 wired connection (I disabled the wifi drivers, too)<br>
	Fiber Internet (very fast)<br>
	Bell Home Hub 3000 router / Sagemcom 5566<br><br>
	In the Port Forwarding, I added two rules:<br>
	1 for Gens (port <span style="background-color:#ffffff; color:#686868; font-size:12.8px; text-align:left"><span> </span>27886<span> </span> UDP only)</span> <br>
	1 for RA (port <span style="background-color:#ffffff; color:#686868; font-size:12.8px; text-align:left"><span> </span>55435, TCP only)<br><br>
	Cheers,<br>
	Aqua</span>
</p>]]></description><guid isPermaLink="false">19555</guid><pubDate>Tue, 17 Dec 2019 20:33:08 +0000</pubDate></item><item><title>RetroArch ver. 1.8.5 - Please Install</title><link>https://forum.nhl94.com/index.php?/topic/19789-retroarch-ver-185-please-install/</link><description><![CDATA[
<p>
	For everyone playing in online games and leagues, please update to RetroArch version 1.8.5. The download is now available on <a href="http://nhl94online.com" ipsnoembed="true" rel="external nofollow">http://nhl94online.com</a>.
</p>

<p>
	 
</p>

<p>
	For those of you who have the previous version currently installed (1.7.9):
</p>

<p>
	<strong>Windows Users - </strong>Download the package from nhl94online.com. Extract the folder to where you wish. Navigate to your RetroArch-1.7.9-32 folder, and copy your "retroarch.cfg" file and your ROMs folder to the new RetroArch 1.8.5 folder. That should keep your ROM files and all your settings the same. Note, you will have to load the ROMs once locally to have them show up on your "Load Recent" list again.
</p>

<p>
	<strong>Mac Users - </strong>Download the package from nhl94online.com Mount the DMG file (double-click on it, then you should have a RetroArch-Mac Disc on your Desktop). Open up the RetroArch-Mac Disc, and you should get the RetroArch Install screen. Drag RetroArch over to the Applications folder in the screen, and choose "Replace" when prompted. Drag the cores folder to the "Drag cores here" folder on the screen. That should be all you have to do (you may get questions depending on your security settings).
</p>

<p>
	 
</p>

<p>
	<strong><span style="font-size:24px;"><u>What's new</u>:</span></strong>
</p>

<p>
	This version brings some more stability to netplay. Relay server is available again in this version. Also, some bugs have been fixed (and others introduced).
</p>

<p>
	When we first started using RA, the relay server seemed to work well for a little bit. I would like to use the relay server as a last resort, for those who cannot port forward or have other issues with hosting. What's nice about the relay server this time around, is that you can switch players on the fly, just like you can do with "direct connect" (hit the "i" key to leave the game).  The relay server option is set to OFF as a default, and if you need to use it for hosting, you can turn it on in Netplay-Host. 
</p>

<p>
	Some of the menus have changed a little from the previous version. The menus are a little more organized.
</p>

<p>
	<strong>One minor bug</strong> - There seems to be a bug with trying to host before loading the game. Depending on a netplay setting, the game video could freeze if you try hosting before loading the ROM. I recommend loading the ROM, then hosting. You can toggle netplay hosting with the "n" key, or going into the Main Menu (F1 key) once the game is loaded. Just be aware of this. If you do host like this by mistake, you can "Close Content", then try again.
</p>

<p>
	 
</p>

<p>
	They update RetroArch monthly lately. But, I'm only going to release updates if I see major improvements, or bug fixes that benefit us. It's designed to run on a lot of things, so there are many updates and bug fixes that don't pertain to our use.
</p>

<p>
	 
</p>

<p>
	Please note: You <strong>cannot</strong> do netplay with different versions, so both players have to be using the same version. In the beginning, please make sure you and your opponent are using the same version, and if not, direct them to the download section on nhl94online.com.
</p>

<p>
	 
</p>

<p>
	Any questions? Please post! I will update netplay thread soon.
</p>
]]></description><guid isPermaLink="false">19789</guid><pubDate>Sat, 25 Apr 2020 03:40:58 +0000</pubDate></item><item><title>RetroArch Feedback (Long form)</title><link>https://forum.nhl94.com/index.php?/topic/18463-retroarch-feedback-long-form/</link><description><![CDATA[
<p>
	EDIT: This is for "long form" experiences with RetroArch.  For Tips and Troubleshooting, check out the <a href="https://forum.nhl94.com/index.php?/topic/18699-retroarch-tips-and-troubleshooting/" rel="">Tips and Troubleshooting</a> thread.
</p>

<p>
	Please post any issues, good or bad experiences you've had during setup or net play here. Hopefully there will be someone who's had the issue and can respond, or we can figure out how to fix it (if possible).
</p>

<p>
	I want to hear gripes/issues/concerns and if you like using the program. I want to hear the good and bad. I think some people will love it, some will hate it. The point is we are looking for a better and easier net play experience for all. If RetroArch doesn't fit that description, I'll keep looking for something else. 
</p>

<p>
	The best thing is RetroArch is still in active development, so if there's an issue that is a huge one, we can ask for it to be fixed (unlike Gens/Kaillera and ZSNES).
</p>

<p>
	This does seem promising, though there is a steep learning curve with the setup and options. If anyone finds something out in the settings they like, please post. Something you don't, please post. Hopefully there will be a way to make setup easier in the future. I haven't explored all the options in the menus, so please feel free to do so.
</p>

<p>
	 
</p>

<p>
	Here's all of the posts on Setup and playing:
</p>
<iframe allowfullscreen="" class="ipsEmbed_finishedLoading" data-controller="core.front.core.autosizeiframe" data-embedcontent="" data-embedid="embed4483080528" scrolling="no" src="https://forum.nhl94.com/index.php?/topic/18460-retroarch-setup-guide/&amp;do=embed" style="overflow: hidden; height: 341px; max-width: 502px;"></iframe><iframe allowfullscreen="" class="ipsEmbed_finishedLoading" data-controller="core.front.core.autosizeiframe" data-embedcontent="" data-embedid="embed8671688401" scrolling="no" src="https://forum.nhl94.com/index.php?/topic/18493-how-to-create-a-save-state-in-retroarch/&amp;do=embed" style="overflow: hidden; height: 341px; max-width: 502px;"></iframe><iframe allowfullscreen="" class="ipsEmbed_finishedLoading" data-controller="core.front.core.autosizeiframe" data-embedcontent="" data-embedid="embed6917739614" scrolling="no" src="https://forum.nhl94.com/index.php?/topic/18493-how-to-create-a-save-state-in-retroarch/&amp;do=embed" style="overflow: hidden; height: 341px; max-width: 502px;"></iframe><iframe allowfullscreen="" class="ipsEmbed_finishedLoading" data-controller="core.front.core.autosizeiframe" data-embedcontent="" data-embedid="embed2167968660" scrolling="no" src="https://forum.nhl94.com/index.php?/topic/18491-retroarch-save-state-uploading/&amp;do=embed" style="overflow: hidden; height: 341px; max-width: 502px;"></iframe>

<p>
	 
</p>
]]></description><guid isPermaLink="false">18463</guid><pubDate>Fri, 25 May 2018 20:48:03 +0000</pubDate></item><item><title>Gary Bettman Malware - I can't check anyone</title><link>https://forum.nhl94.com/index.php?/topic/19103-gary-bettman-malware-i-cant-check-anyone/</link><description><![CDATA[
<p>
	I can't check in SNES but I can shoot. I deleted retroarch and started from scratch, and I still can't check, but I can shoot.
</p>

<p>
	Is this some kind of rootkit that Gary Bettman paid Russian hackers to design? Anyone else have this experience?
</p>

<p>
	Here's what I got:
</p>

<ul>
<li>
		3 prong outlets
	</li>
	<li>
		Ethernet (cable)
	</li>
	<li>
		Saturn USB controller 
	</li>
	<li>
		Chaos Retroarch guide
	</li>
	<li>
		Genesis player who sincerely appreciates SNES version and takes back anything bad I ever said about SNES'94
	</li>
</ul>
<p>
	I just want to check, please.
</p>

<p>
	 
</p>

<p>
	 
</p>

<p>
	 
</p>
]]></description><guid isPermaLink="false">19103</guid><pubDate>Fri, 28 Jun 2019 02:44:08 +0000</pubDate></item><item><title>RetroArch Issue: Delayed Button Presses / Jumpy Players</title><link>https://forum.nhl94.com/index.php?/topic/18718-retroarch-issue-delayed-button-presses-jumpy-players/</link><description><![CDATA[
<p>
	I have two issues, which I experienced with jrolling.
</p>

<p>
	Issue 1: Delayed Buttons <br>
	When I hosted, with a Direct connection, the timing was off. (This is almost always the case for me, with anyone, when I use RA.)  It felt on my end like I was playing someone in Finland.  There was a "constant lag", though it was uniform (no lag spikes).  We did get a game in successfully, but I prefer using GENs because (most of the time) the button presses are more immediate.  With the RA lag I experience, quick one timers are off, as are finesse dekes.  On jrolling's side, he felt things were fine. (Though he is new, so maybe not acquainted with the nuances in feel, yet.)<br><br>
	Issue 2: Jumpy Players<br>
	When he hosted, with a Relay connection, it was unplayable for me.  On his end, he said it was fine again.  This time, even in menus, I could see it was off.  His movements were frenetic when choosing his team, and flickering all over.  When the puck dropped, my players were teleporting many pixels from where they should be, and jumping back again.  After 5 seconds I stopped the game and said we needed to troubleshoot.  Trouble(shoot) was, we are both new to RA, and had already had a heck of a time getting game 1 in, so we bailed.  I was exhausted, and near tears. (Ok, I exaggerate.)<br><br>
	NOTE: I understand I can use the "i" hotkey, to keep hosting, and have RA swap players 1 and 2, so he would be home even on my host, right?  I tried this, and the behavior was strange. (I feel like it booted me out of the ROM, but maybe I hit another key?)  My expectation was, at ROM menu where you choose teams, hit "i" and he would seamlessly be home, and I would seamlessly be visitor, no muss, no fuss.  Is my expectation wrong?<br><br>
	Thanks to any and all who can assist. <span style=""><img alt=":)" data-emoticon="true" height="20" src="https://forum.nhl94.com/uploads/emoticons/default_smile.png" srcset="https://forum.nhl94.com/uploads/emoticons/smile@2x.png 2x" title=":)" width="20"> (Probably "any and all" is poor Chaos.... *sigh*)</span><br>
	 
</p>
]]></description><guid isPermaLink="false">18718</guid><pubDate>Thu, 27 Dec 2018 16:58:14 +0000</pubDate></item><item><title>RetroArch Issue: Fast Desync</title><link>https://forum.nhl94.com/index.php?/topic/18701-retroarch-issue-fast-desync/</link><description><![CDATA[<p>
	Atomic and I experience quick Desyncs when we try to play together.  Either from start of game, or near start (within seconds).<br><br>
	Both run Windows. Both have Port Forwarding (so Relay Off).<br><br>
	Not sure how to troubleshoot it? (I will google, but thought someone might have insight?)  Played GENs without issue after.
</p>]]></description><guid isPermaLink="false">18701</guid><pubDate>Wed, 05 Dec 2018 19:59:55 +0000</pubDate></item></channel></rss>
