Jkline3 Posted January 8, 2020 Report Share Posted January 8, 2020 Been discussing this on another thread but posting this separately (mostly so I can find again later...) in case anyone else cares to use. Changing the orientation of the center ice logo to match the layout of current NHL ice surfaces is pretty simple, you only need to rearrange the order of the tiles in a hex editor. In Tile Molester, add your ice logos as usual, however rotate them -90 degrees and change your view from 6x4 to 4x6: In a hex editor the following needs to be updated to change the orientation from horizontal to vertical: If you want to bring the red line up to the logo and not leave blank space, change the top 2 pairs of circled 008F to 012B and the bottom 2 to 112B. 3 1 Quote Link to comment Share on other sites More sharing options...
Sauce Posted January 8, 2020 Report Share Posted January 8, 2020 (edited) Awesome! Thanks for putting this all together! Edited January 8, 2020 by The Sauce Quote Link to comment Share on other sites More sharing options...
UltraMagnus Posted March 17 Report Share Posted March 17 On 1/8/2020 at 12:07 PM, Jkline3 said: Been discussing this on another thread but posting this separately (mostly so I can find again later...) in case anyone else cares to use. Changing the orientation of the center ice logo to match the layout of current NHL ice surfaces is pretty simple, you only need to rearrange the order of the tiles in a hex editor. In Tile Molester, add your ice logos as usual, however rotate them -90 degrees and change your view from 6x4 to 4x6: In a hex editor the following needs to be updated to change the orientation from horizontal to vertical: If you want to bring the red line up to the logo and not leave blank space, change the top 2 pairs of circled 008F to 012B and the bottom 2 to 112B. Is this appliable to NHL95? Quote Link to comment Share on other sites More sharing options...
UltraMagnus Posted March 17 Report Share Posted March 17 Here is the similar details you have above for 94. Quote Link to comment Share on other sites More sharing options...
Jkline3 Posted March 17 Author Report Share Posted March 17 Not familiar with the rink layouts in '95 but based on the above it seems like the concept would be similar? Quote Link to comment Share on other sites More sharing options...
Sean Posted March 17 Report Share Posted March 17 Rotated center ice logos are soooo hot right now. (and also very cool, so I’m excited to see what you’re up to!) Quote Link to comment Share on other sites More sharing options...
UltraMagnus Posted March 17 Report Share Posted March 17 @Jkline3 You were right...Its just finding which spot to move the images to. 1 Quote Link to comment Share on other sites More sharing options...
UltraMagnus Posted March 17 Report Share Posted March 17 Replacing the 41 C2, 41 C7 with 01 54 Replacing the 41 C8, 41 CD with 01 5B This allows the center ice red line to move up to the logo like you have done above. Rearranging the bytes to go from 4x6 to 6x4 will be another thing to figure out. Quote Link to comment Share on other sites More sharing options...
Jkline3 Posted March 17 Author Report Share Posted March 17 OK... In hex editor you need to change the tiles as follows: Find your current center ice logo: Save a copy of your center ice logo and rotate it from a horizontal to a vertical format. Change your tile layout from 6x4 to 4x6: Paste the rotated logo into TM: Should be good from there... 1 Quote Link to comment Share on other sites More sharing options...
UltraMagnus Posted March 17 Report Share Posted March 17 Sick!!!! @Jkline3a master that you are. Now need to figure out how to change the crease and add the trapezoid behind the net hahaha Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.